Pinball Xperience

Buying a Pinball Machine: Where to Buy and What to Avoid

· Lazarvs

Buying a Pinball Machine: Where to Buy and What to Avoid
jersey jack pinballstern pinballbarrels of fun pinballChicago Gaming Companyspooky pinballpinball brothersamerican pinballpinballarcade gamingpinball xperiencepinball investmentbuying pinball machinespinball valuepinball resaleguide d’achat flipperpinball buying guidedébuter au flipperPX Academy

Buying a pinball machine has never been easier. A few searches are all it takes today to find a machine from a private seller fifty kilometers away, a French distributor, a European importer, directly from an American manufacturer, or on the preorder page of a company whose first factory may not even have existed twelve months ago. This explosion in buying options gives you access to far more machines, but it also adds another question to choosing a title: who are you actually giving your money to? And when a purchase can easily represent several thousand, or even more than ten thousand euros, that question can become just as important as choosing the machine itself.

Two identical machines offered at the exact same price can represent two radically different transactions. In one case, you are buying from a French professional who delivers the machine, installs it, and remains legally responsible as your seller if something goes wrong. In another, you are making an international wire transfer directly to a small foreign manufacturer for a machine that has not even been built yet. Between those two extremes are private sellers, professional used-machine dealers, importers, official distributors, manufacturers selling direct, marketplaces, preorders, deposits, and every possible combination of them. Price is never the only thing you are buying. You are also buying a level of protection, a point of contact, a level of service, and a greater or lesser amount of risk.

The purpose of this guide is not to declare that one purchasing method is always better than another. Some of the best deals happen between private individuals. Buying directly from a manufacturer can give you access to a machine that would otherwise be impossible to find. An importer can provide terrible service. A distributor that has been established for years can provide outstanding service. Risk does not depend only on who you are buying from, but also on what you can actually verify before handing over your money. An existing, identifiable machine covered by a clear legal framework does not expose you to the same risk as a pinball machine still in production, a project financed in advance, or an order placed on the other side of the world. In every case, the fundamental question remains the same: what exactly are you risking if something goes wrong?

First things first: identify who is actually selling you the machine

This is the question many buyers forget to ask. You may be talking to a distributor, receiving information from an importer, paying through a website owned by the manufacturer, and being delivered by a fourth company. That does not mean all of those companies have the same obligations toward you. Look at the invoice or purchase order and clearly identify who is legally the seller. That person or company is your primary contractual counterpart.

In France, when a consumer purchases a product from a professional seller, the statutory warranty of conformity is the responsibility of that professional seller. It applies to both new and used goods for two years from delivery. For new goods, defects appearing during that period benefit from the legal presumption provided under the current framework. For used goods, that presumption applies for a shorter period. The distinction between seller, manufacturer, importer, and distributor is therefore not an administrative technicality. It directly determines who is responsible when the machine does not conform to what was sold.

This distinction also helps avoid a practice that is still far too common: a professional seller telling you after the sale that “for warranty issues, you need to contact the manufacturer directly.” A manufacturer may of course provide an additional commercial warranty, but that does not replace the professional seller’s legal obligations toward the customer. A commercial warranty is optional. It supplements statutory protections, it does not erase them. Remember this first rule: before deciding where to buy, know who you are buying from.

Buying directly from a private seller

Private sales are an essential part of the pinball market. An owner sells a machine to finance the next one, make room, or simply because they feel they have gotten everything they wanted out of it. You go to their home, see the machine, play a few games, inspect its condition, negotiate if appropriate, and take it home. This is probably the most natural way to buy a used pinball machine, but it is also the one that places the greatest responsibility on your own ability to evaluate the machine.

Its main advantage is obvious: you see the actual machine you are buying. Not a catalog reference, not an “equivalent” machine, that exact one. You can inspect the playfield, cabinet, ramps, flippers, run diagnostics, look under the playfield, and talk to the person who may have owned and played it for several years. You can also obtain a much richer history: maintenance performed, mods installed, parts replaced, previous problems, approximate number of games, and the reason for selling.

Private sales also provide access to machines that are no longer in production and editions that have become difficult to find. A machine carefully maintained for years by an enthusiast can even be a better purchase than one that has barely been played but has never received any serious maintenance. Used does not automatically mean “worse.” It mainly means you are buying a machine with a history.

The tradeoff is significant: you do not receive the same protections as when buying from a professional. A private seller can still be liable for hidden defects under certain circumstances, but the statutory warranty of conformity governing consumer-to-professional transactions does not apply in the same way. That completely changes the situation if a dispute arises. You cannot buy an older machine with several visible defects and then expect the private seller to become your permanent service department.

That is why a pre-purchase inspection is essential. The seller refuses to let you play it, will not open the backbox or raise the playfield, refuses to run diagnostics without a legitimate reason, claims everything works while the machine is already disassembled, or gives inconsistent answers about its history? None of those things automatically proves fraud, but the more of them you encounter, the more cautious you should become. Private-to-private transactions can be an excellent way to buy, provided the machine is visible, verifiable, and actually inspected.

Buying remotely from a private seller

Same private seller, completely different transaction. You find a machine several hundred kilometers away, the pictures look fantastic, the seller seems friendly and offers to arrange transportation. From that point on, you are no longer just buying a machine. You are buying a considerable amount of trust.

The advantage is obvious: your market becomes dramatically larger. For a rare machine or a specific edition, this may become essential. A serious seller can also provide a comprehensive package with detailed photographs, specific videos, diagnostic screens, serial number, original invoice, and service history. In that situation, a remote purchase can make perfect sense.

The problem is that you lose the greatest advantage of a private sale: physical inspection. A photograph can hide an enormous amount simply by not showing it. A short video of a ball traveling up two ramps does not prove that every mechanism, switch, display, board, and playfield component works correctly. You also introduce the risk of fake listings using photographs taken from an old sale, or a seller who does not even own the machine.

For a remote purchase, ask for evidence that a fake seller cannot easily prepare: a customized photograph showing today’s date, a picture of a very specific area that you choose, a particular diagnostic menu, the underside of the playfield, or the serial number. Better yet, ask for a live video call. Not a prerecorded video. You should be able to say, “show me the left ramp right now,” and watch the seller do it live. When several thousand euros are involved, fifteen minutes of verification is not an unreasonable demand.

Buying a new machine from a French distributor

For a beginner, this is generally the most comfortable route. You choose the machine, the distributor orders it or already has it in stock, you receive a French invoice, and they may also arrange delivery and installation. The main advantage is not simply the product. It is having someone to deal with.

When a problem occurs, you theoretically do not have to start by emailing an American manufacturer in English and hoping a technician responds quickly. Your seller is local, operates under the consumer laws applicable to the transaction, and remains your point of contact for the statutory warranty. A good distributor also provides value before anything breaks: receiving and inspecting the machine, making adjustments if necessary, preparing it, organizing transportation, installation, and providing advice.

That is why two distributors offering the same machine at the same price are not necessarily offering the same experience. One may employ a technician, know the manufacturers inside and out, stock certain parts, respond quickly, and genuinely support its customers. The other may be excellent at taking orders and considerably harder to find when the first problem appears. The word “distributor” is not a quality certification by itself.

The main disadvantage is often financial. A middleman obviously needs to make a living, and the price may be higher than some direct or foreign alternatives. But the real bad deal is paying for service without actually receiving service. Before buying, ask who handles after-sales support, whether the company has a technician, how warranty parts are managed, whether the machine is inspected before shipping, what delivery actually includes, and who gets involved when something goes wrong during setup.

A serious professional should be able to answer those questions simply. “Don’t worry, we’ll take care of everything” is not an after-sales service procedure. Ask how.

Buying a used machine from a professional dealer

This is an especially interesting option because it can combine the advantages of the secondary market with those of a professional transaction. A dealer may offer customer trade-ins, demo machines, showroom units, or simply operate as a used pinball retailer.

The advantage is significant: you can gain access to a machine that is no longer available new while retaining the legal framework of a professional sale. In France, when a consumer buys a used product from a professional, the statutory warranty of conformity still applies for two years, even though the rules concerning the presumption of defects differ from those for new products. That provides considerably more protection than a private sale.

The downside is that the price will often be higher than in a private transaction, which makes sense because the professional takes a margin, assumes legal responsibility, and absorbs part of the commercial risk. That difference can be entirely justified if the machine has been inspected, prepared, and genuinely warranted.

This is also where you may encounter wording such as “three-month warranty,” “parts-only warranty,” or “workshop warranty.” Read those terms very carefully. An additional three-month commercial warranty can certainly exist, but it does not eliminate the consumer’s statutory rights. The same applies to a parts-only warranty: you need to distinguish what the professional voluntarily offers in addition to what the law already requires.

A professional selling a used machine should therefore be evaluated on two fronts: the actual condition of the machine and how seriously they accept their legal responsibility for what they sell. A prepared, documented, properly warranted machine can justify a premium. A machine that was quickly cleaned and marked up with a “serviced” sticker, much less so.

Buying from an importer

The word “importer” can describe very different situations, and this is where many misunderstandings begin. An importer may purchase machines from the manufacturer, import them under its own name, and then resell them to you. In that case, if that company appears as the seller on your invoice, it is your seller. But a company may also act solely as an intermediary or agent while the sale is legally concluded directly with the foreign manufacturer.

Those are not the same thing.

A genuine importer-distributor can provide considerable value. It handles import procedures, theoretically understands the relationship with the manufacturer, knows recurring issues with particular models, centralizes parts requests, and provides a local point of contact. If it is also your legal seller, that proximity becomes particularly important when a problem requires support.

The disadvantage is that another link has been added to the chain: manufacturer, importer, customer. If the importer has an excellent relationship with the manufacturer and a genuine technical department, that middleman is useful. If all it does is forward your messages to the manufacturer and wait for a response, its value becomes considerably less obvious.

The question remains the same: who appears as the seller on my invoice? Not who takes the order, not who answers you on Facebook, not who has the “official importer” sign. Who invoices you? That answer determines the beginning of your legal relationship.

Buying directly from an importer with its own distribution network

The word “importer” instinctively inspires confidence. It officially represents a brand in a territory, maintains a direct relationship with the manufacturer, and is often the point through which machines enter the country. You might therefore naturally assume that it provides the best level of after-sales support. In practice, that is not necessarily the case, and the situation can even become paradoxical. An importer can be highly efficient at logistics, parts, and manufacturer relations while being far less suited to performing work at a private customer’s home.

First, understand what an importer actually does. An importer generally sits between the manufacturer and a network of distributors. It imports the machines, handles their arrival in the territory, supplies dealers, and centralizes part of the relationship with the brand. The distributor is normally the final link in the chain and the one dealing directly with the customer. That distinction may seem purely commercial until the day your pinball machine breaks down.

The real advantage of a dealer network is precisely its geographic coverage. A nearby dealer can prepare your machine, deliver it, install it and, most importantly, potentially provide local technical support. An importer usually operates from a much more centralized location. If you live several hundred kilometers from its facilities, ask before buying how a problem requiring someone physically present will be handled. A part shipped by courier has never replaced a technician standing in front of a machine.

This becomes even more important when an importer with an established dealer network also decides to sell directly to consumers. Look objectively at what that arrangement means. By removing the distributor from the transaction, the importer potentially retains a larger share of the commercial margin. There is nothing illegal or inherently wrong with that. But the customer should know what they receive in exchange for that disintermediation. If the local dealer disappears from the transaction, its local service may disappear with it.

One thing is certain: if the middleman disappears but the price paid by the customer does not fall proportionally, it is perfectly legitimate to ask what service has replaced the distributor’s role.

This is generally where unpleasant surprises can begin. Your machine develops a problem, the importer diagnoses it remotely, contacts the manufacturer, possibly ships you a part, and explains how to perform the repair yourself. For an experienced player comfortable using a multimeter and replacing a mechanism, that can work perfectly well. For a beginner who specifically bought from a professional because they did not want to become a pinball technician three weeks after delivery, the experience is considerably less entertaining.

There is also an obvious situation worth anticipating: the distributor you deliberately bypassed to buy directly from the importer has no obvious commercial reason to become your local technician for free. Yes, even when it is a passion-driven business, that does not mean “no money involved.” The distributor may agree to perform the work, charge for it, or have an agreement with the importer, but never assume that. The dealer network that normally represents one of a brand’s greatest strengths in a territory only protects you if responsibilities between manufacturer, importer, and distributors have actually been organized to do so.

Before buying directly from an importer that also operates a dealer network, ask questions much more specific than “Do you provide after-sales service?” Who comes to my home if physical intervention is required? Which technician covers my region? Will my local distributor service machines purchased directly from you? Is there an agreement between you covering this? Who pays for that intervention when it falls under warranty? If nobody comes out, what repairs will I be expected to perform myself?

If the answer boils down to “Don’t worry, we’ll send you the parts,” then at least you know what you are buying: essentially remote after-sales support, Luxembourg style. That may suit you perfectly, but it is not the same service as a network capable of providing local assistance.

That is the importer paradox. It can be the commercial entity closest to the manufacturer while being physically the farthest from your gameroom. Conversely, a distributor may carry less weight with the manufacturer but be forty kilometers away with a van, tools, and someone who knows how to repair a pinball machine.

There is no need to draw cards to determine which one will be better. Simply ask who will do what when something breaks, and when appropriate, make sure important commitments are written into the contractual documents. The “official importer” logo tells you about the company’s commercial relationship with the brand. By itself, it does not tell you who will stand in front of your machine when it stops working.

Buying directly from a manufacturer outside the European Union

This is where many buyers look at a price in dollars, quickly convert it to euros, and start thinking they have had a brilliant idea. The calculation is not finished.

A machine shipped to France from outside the European Union can involve international shipping, insurance, import VAT, possible customs duties, customs clearance fees, and exchange-rate fluctuations. The price displayed on an American website is therefore not the final price of the machine sitting in your gameroom.

The advantage remains obvious: you can access a machine that is not distributed locally, obtain a specific configuration, or buy directly from a small manufacturer. For certain rare models, this may be the only solution. But the constraints increase considerably. You add the risk of damage during a much longer journey, customs procedures, and above all after-sales service located thousands of kilometers away. If a part simply needs to be shipped, that remains manageable. When a complex diagnosis requires physical intervention, the situation changes.

The essential point is this: having a legal remedy and being able to exercise it easily are two different things. A machine that is unavailable anywhere else may justify that level of complexity. Saving a few hundred euros on a model available from several European professionals is much harder to justify.

Preordering a machine that has not been built yet

Welcome to the point where purchasing starts to resemble financing.

You know the manufacturer, the theme has been announced, perhaps a prototype exists, and you pay money to reserve your machine. There is nothing inherently alarming about this model. Preorders are perfectly normal across many industries. But the moment your money leaves your account before your machine exists, you are accepting additional risk.

You need to determine exactly what the money you paid represents. Under French law, different types of advance payments can have different legal consequences. Read the contract rather than relying on whatever term was used during a phone conversation.

You should also request a clear delivery date or timeframe. “Second half of the year,” “soon,” “when production begins,” or “hopefully before Christmas” are very different commercial statements from a contractual commitment. The farther away production is, the more important it becomes to know what happens to your money if the project is delayed or disappears.

Finally, ask the questions enthusiastic buyers generally prefer to postpone: is your money immediately being used by the company? Is it held separately? How many machines has the company already delivered? Has series production actually begun? What percentage of the total purchase price are you paying before your machine exists?

With hindsight and my own experience of the market, however, I would add an important distinction. Not all preorders carry the same level of risk. If an established manufacturer such as Stern Pinball, Jersey Jack Pinball, Spooky Pinball, Barrels of Fun, or Chicago Gaming Company asks you to reserve a machine long before delivery, I personally would not put that transaction in the same category as a preorder from a new manufacturer that has never delivered anything. Those companies have already demonstrated their ability to manufacture and commercialize pinball machines at scale. That significantly reduces part of the industrial risk, although it obviously does not constitute a legal or financial guarantee that your machine will be delivered on a specific date.

As for delivery times, they can be all over the place. In pinball, preorder does not mean delivery a few weeks later. Depending on the manufacturer, title, your position in the production schedule, and the distribution channel, the wait can last several months and, in some cases, become considerably longer. I would therefore never present “one or two years” as a general delivery time applicable to all of these manufacturers, but very long waits can happen on certain productions. Before tying up several thousand dollars or euros, always request a written timeframe and treat it with appropriate caution.

For much newer manufacturers, or companies that have not yet demonstrated their ability to consistently manufacture and deliver production machines, my personal position would be far more conservative: I would not preorder. I would wait for the first customer deliveries. That does not mean those companies are going to fail. It simply means refusing to assume part of the risk of launching their industrial operation on their behalf.

A beautiful license, a finished prototype, and spectacular marketing prove that a project exists. They do not prove that a company can purchase components, industrialize the machine, assemble several hundred units, finance its operations throughout production, and then provide parts and after-sales support.

For a new manufacturer, waiting a few months can completely change the equation. Let the first machines leave the factory. See whether customers actually receive them. Watch the build quality, the first problems, parts availability, and how the manufacturer treats its first customers. You may lose your opportunity to own number 37 of 500.

What you gain is far more valuable: the ability to buy a machine instead of a promise.

Crowdfunding, founder packages, and manufacturers financed by their customers

This is the next level of risk. The manufacturer is no longer merely using your deposit to reserve a machine. Your money directly contributes to making the project possible. This can take the form of crowdfunding, a founder package, a particularly large advance payment, or a preorder opened so early that the economic line between purchasing and financing becomes extremely thin.

Crowdfunding is not inherently a scam. Extraordinary projects have existed because of crowdfunding. But understand what you are doing: you are no longer simply financing your own product. You are assuming part of the company’s entrepreneurial risk.

A working prototype is not industrial production. A prestigious license is not proof of solvency. A photographed factory is not a guarantee of production capacity. Enthusiastic influencers are not auditors. And a Discord full of customers convinced that asking questions about delays amounts to betrayal still does nothing to improve the company’s cash flow.

For a first production run, the simplest way to reduce your risk remains obvious: wait until the first machines have actually been delivered. You may pay more. You may not get a particularly low serial number. But you will have transformed an industrial promise into an observable product.

Haggis Pinball: a real manufacturer can still disappear

The Haggis case is useful precisely because it prevents an overly simplistic conclusion. Haggis was not a fake website created three days earlier using a few 3D renders. The Australian company actually manufactured and delivered machines. It had projects, customers, a community, and an identifiable industrial operation.

In July 2024, Haggis Pinball Pty Ltd nevertheless officially entered liquidation. Customers still had machines or money tied up in pending projects. The case is a reminder of something essential: a real company can fail. Fraud does not need to be established for your money to be at risk. Poor cash flow, badly controlled costs, slow production, or an insufficiently profitable business can be enough.

The language therefore needs to remain extremely precise. Haggis’ liquidation is documented. That does not automatically turn every executive or every preorder into a “scam.” The lesson is more useful than that: a genuine manufacturer with genuine machines already produced can still fail to deliver everything it promised. That is industrial risk.

Deeproot: a different story, the same need to look behind the product

Deeproot is regularly mentioned among the major recent pinball disasters, but its history also needs to be described accurately. In 2021, the U.S. SEC accused Robert J. Mueller and Deeproot Funds of defrauding investors who had placed tens of millions of dollars into funds connected to his business environment. The case involved financing and investors, not simply a fake crowdfunding campaign selling pinball machines to consumers.

The lesson remains relevant for buyers: a stunning prototype tells you almost nothing about the financial strength of the company expected to mass-produce it. A company can have designers, a license, a spectacular prototype, and ambitious marketing while resting on a deeply problematic financial structure. When you hand over several thousand dollars or euros long before production begins, you therefore have every reason to examine the company as closely as the product.

Preordering through a distributor does not automatically eliminate the risk

This is a more subtle situation. You are not paying the small manufacturer directly. You give your deposit to a local distributor that has itself placed orders with the manufacturer. Psychologically, that feels much safer. Legally and financially, everything depends on the contract.

Who actually holds your money? Has the distributor already transferred it to the manufacturer? Who must refund you if the machine is never produced? Does your purchase order cover a machine the distributor is contractually committed to delivering, or does it specify that the distributor is merely acting as an intermediary?

Never assume that simply handing your money to a local company automatically protects you from the manufacturer disappearing. Read what you sign and ask who carries the risk if production never happens.

Buying through Facebook, Discord, forums, or community groups

Communities are excellent places to find machines. Pinball remains a small enough world that a particular machine may be known by several people, a seller may have a visible history, and another member may immediately tell you they have known that machine for years. That reputation is valuable. But it is not a guarantee. Hell no.

An old account can be hacked. A well-known person can run into financial trouble. A friendly community member can absolutely sell a poorly maintained machine. And a group administrator is not your insurer, your expert, or your lawyer. Use reputation as an additional piece of information, never as a replacement for your own verification. A community history can help you understand a machine. It should never convince you to send several thousand dollars simply because “everybody knows the guy.”

And above all, do not be naive about how communities work. In France in particular, the pinball world remains relatively small, but it certainly is not one big family where everyone is friends with everyone else. There are groups, friendships, rivalries, commercial interests, and local networks. The scene can be highly territorial. Someone enthusiastically recommended in one group may be far less appreciated in another, sometimes for good reasons, sometimes simply because those people cannot stand each other. A community recommendation should therefore remain exactly what it is: an opinion, not a certificate of good character.

Arrangements between acquaintances exist as well. Someone may be trying to sell a friend’s machine, consistently defend a professional with whom they have a good relationship, or tell you a transaction is fantastic while having a personal interest in seeing it happen. Pressure can also appear: “You can trust him,” “Everyone knows him,” “If you hesitate, somebody else will take it,” “I’ll vouch for him.” Fine. But when payment time comes, it is your bank account being debited.

Above all, never confuse visibility with reliability. The most visible, longest-established, or loudest people in a community are not automatically the people you should trust the most. A loudmouth is still a loudmouth, even with twenty years of pinball experience, 5,000 forum posts, and half the Facebook group in their contacts. Trust is built on facts: verifiable identity, a machine that actually exists, a coherent history, transparent answers, the possibility of inspection, and clear transaction terms.

Apply the same caution to the community’s “white knights,” the people who immediately appear to defend a person, seller, or professional whenever criticism arises. Their intervention may be completely sincere, but it is still not evidence. “I’ve known him for fifteen years,” “He’s always been straight with me,” or “I’ll personally vouch for him” tells you nothing about your transaction. Someone can complete fifty sales without a problem and have a serious dispute on the fifty-first. Conversely, one isolated accusation is not enough to condemn someone either.

In a small community, personal relationships easily blur roles. The person defending the seller may be their friend, customer, business partner, may have sold them machines for ten years, or may simply see criticism of someone in their circle as criticism of their own group. Sometimes the white knight is defending a relationship more than a transaction whose details they actually know. That is not necessarily malicious, but for the buyer the result is the same: their testimony replaces none of your own verification.

Be just as wary of instant public trials as collective absolution. Neither the mob screaming “scammer” nor the battalion replying “impossible, he’s a great guy” should make the decision for you. Ask for facts, verify what can be verified, and keep your wallet out of clan wars. In a $10,000 transaction, a white knight can vouch for someone with absolute conviction. If they are wrong, they are generally not the one losing the $10,000.

The same applies when a conflict develops around a seller. Do not automatically believe whoever shouts the loudest. Look for facts. Multiple documented transactions that ended badly constitute information. A complete screenshot may constitute another piece of information. An identifiable commercial dispute deserves your attention. “Everyone knows he’s a scammer,” without a single verifiable element, does not tell you much. In a small scene where personal vendettas also exist, reputation needs to be verified in both directions.

And real scams obviously exist. Fake profiles, hacked accounts, stolen photographs, nonexistent machines, deposits collected before the seller disappears: a specialized community is not immune simply because everyone shares the same passion. That sense of belonging can even become a vulnerability when it causes people to abandon basic caution.

The rule is therefore very simple: trust the community to help you find information, never to perform your verification for you. Ask to see the machine. Verify the seller. Check the history. Request personalized evidence for a remote purchase. Resist pressure. And when several thousand dollars or euros are involved, never allow the reputation of a username to replace your own judgment.

In pinball, as everywhere else, knowing everyone does not mean someone deserves access to your wallet. And the loudest voices certainly are not always the most reliable. Sometimes they simply make more noise than everyone else.

Buying through a general marketplace

Leboncoin and equivalent marketplaces can produce excellent deals simply because they reach far more sellers than specialized communities. Naturally, they also attract fake listings and opportunistic sellers.

The first indicator remains price. A machine normally selling for around €9,000 that suddenly appears for €5,000 from someone who “has to leave the country tomorrow” deserves something more than an enthusiastic wire transfer. Good deals exist. A statistical absurdity requires an explanation.

The classic techniques remain stolen photographs, fake shipping companies, urgent deposit requests, requests to pay outside the platform, and identity theft. Your best defense remains the same: ask for something a fake seller cannot easily produce, verify their identity, and refuse to be pressured.

Questionable practices from some professionals

Being a professional does not automatically make someone competent, honest, or pleasant. It mainly makes the seller easier to identify and subject to a clearer legal framework. Certain statements should nevertheless prompt you to ask questions.

When a professional advertises a “three-month warranty,” immediately ask whether they mean an additional commercial warranty or whether they are claiming your statutory rights end after three months. Those are not the same thing. The same applies to “parts-only warranty,” “return to workshop at your expense,” or “after three months, contact the manufacturer.” Consumer rights do not simply disappear because a line in the terms and conditions tries to summarize them differently.

Another example is a “price excluding tax” on an offer clearly intended for consumers. A consumer must be able to understand what they will actually pay. The displayed price and any additional costs must be clearly presented before purchase. A €9,000 machine that suddenly becomes €10,800 when the invoice arrives is not a commercial technicality.

Apply the same caution to vague dates. “Second quarter,” “next container,” “available soon,” or “expected arrival” can be useful information, but they do not necessarily constitute contractual commitments. The more money you pay before delivery, the clearer the date should be.

Finally, if a professional spontaneously offers you “a better price without an invoice,” the conversation should end fairly quickly. On a purchase worth several thousand dollars or euros, an invoice is not a decorative option.

Payment: the moment risk becomes real

As long as you are talking, the risk remains theoretical. When you pay, it becomes financial. Do not choose a payment method solely according to what is most convenient for the seller. Check what protections your bank, credit card, or payment provider offers, especially for a remote purchase.

A bank transfer has one remarkable quality for the seller: the money arrives directly. For the buyer, the ability to dispute or recover that money may be much more limited than with payment methods offering specific protection procedures. Before making a major payment, find out what happens in the event of fraud or non-delivery.

Above all, beware of pressure: “I have ten people waiting behind you,” “deposit within the hour,” “otherwise it’s gone.” Maybe. Let it go if you have not finished your checks. Losing a great machine because another buyer was faster is frustrating. Losing several thousand dollars because you wanted to be faster than them is considerably worse.

Remote purchases from professionals: the right of withdrawal may also apply

When a consumer concludes a remote purchase with a professional, a fourteen-day right of withdrawal generally exists in many situations under French and EU consumer law, subject to statutory exceptions. For goods, the period generally begins upon receipt. It can also apply to certain orders placed online and later collected in person.

But returning a pinball machine is obviously not like returning a T-shirt. An object weighing more than one hundred kilograms creates significant packaging and transportation constraints. Before buying, determine who would pay the return shipping costs and what procedures apply. A theoretical right can become very expensive to exercise if the logistics were never considered.

Delivery is part of the purchase

A great machine can suffer a terrible journey. Before shipment, ask how it will be packaged, protected, and insured. Also determine what happens if it arrives damaged. A machine shipped on a pallet, specialist transportation with professional handling, and a pinball machine transported lying down in someone’s vehicle do not carry the same risks.

Ask for photographs before departure and inspect the machine upon arrival. If damage is visible, document it immediately and follow the procedure applicable to that particular shipment. Do not automatically sign a document stating that everything is perfect when the cabinet has clearly just competed in an international furniture-throwing championship.

Importing a used machine yourself from outside the European Union

Another specific situation: you buy from a private seller in the United States, United Kingdom, Switzerland, or another country outside the European Union. You are now combining private-sale risk, potentially no physical inspection, international transportation, customs procedures, import VAT, possible duties, and more complicated cross-border remedies.

This type of purchase can make perfect sense for a machine that is genuinely impossible to find in Europe or for an exceptional edition. On the other hand, importing a model available a few hundred kilometers away at considerable expense just to save a few hundred euros on the advertised price can look considerably less brilliant once every cost has been added.

The checklist before you pay

Before any major purchase, you should be able to clearly answer a few essential questions: who is my legal seller, are they a professional or a private individual, what country are they established in, does the machine already exist, have I seen this exact machine, is it new, used, a demo unit, or a preorder, what exactly does the price include, is delivery included, what is the expected delivery date, what does any advance payment represent, who holds that money, who handles after-sales service, and what warranties actually apply?

Add the machine-specific questions: serial number, edition, included accessories, original parts, condition, history, parts availability, and shipping method. If five of your answers begin with “I assume,” you have not finished your homework. On a purchase worth several thousand dollars or euros, uncertainty needs to be identified before payment, not discovered afterward.

Not every buying method carries the same level of risk

  • An existing machine sold locally by a private individual and physically inspected mainly presents technical risk: you need to know what you are buying.

  • An existing machine sold by a good local professional adds stronger legal protection and potentially accessible after-sales service.

  • A used machine sold by a professional will often cost more than one sold privately but comes with additional protections.

  • A machine purchased remotely from a European professional remains relatively well regulated but adds logistical constraints.

  • A machine purchased directly from outside the EU adds international transportation, taxes, customs, and greater after-sales service difficulty.

  • A machine still in preorder adds industrial risk.

  • A first production run heavily financed by customer deposits adds even more risk.

  • A prototype developed by a startup with no delivery history puts you surprisingly close to becoming an amateur investor, even if the contract still calls you a customer.

That last category can be exciting. It can help new manufacturers come into existence. But understand that you are no longer paying only for a product. You are also financing a company’s ability to successfully manufacture it.

The best purchase is not always the cheapest

A distributor may charge a few hundred euros more and save you three weeks of arguments when a problem appears. A private seller may offer a cheaper machine that immediately requires expensive repairs. A foreign manufacturer may advertise an incredible price until shipping, taxes, and after-sales service enter the equation. A preorder may look attractive until delivery starts slipping from quarter to quarter.

The price of the pinball machine is one piece of information. The risk of the transaction is another. You need to compare both.

Quality service has value. A warranty that is genuinely honored has value. A machine you can inspect has value. An identifiable and solvent seller has value. None of that is necessarily visible on the first line of the invoice, but it can become extremely visible the moment something goes wrong.

A professional can encounter a problem. What matters is how they handle it.

A distributor can make a mistake. A manufacturer can experience a delay. A part can be unavailable. A shipping company can damage a machine. A pinball machine can even come out of the box with a problem despite every inspection performed beforehand. None of those events alone makes a company a bad professional. The real test begins afterward: how the problem is handled.

You need to be treated like a customer. That does not necessarily mean receiving a miraculous solution within two hours, but you should receive a response, know who is handling your case, understand what is going to be done, and have some idea of the timeframe. A good professional is therefore not judged only when everything goes well. Anyone can take a payment and ship a machine that works. When something goes wrong, you discover who you actually bought your pinball machine from.

A delay that is announced, explained, and followed up is nothing like three successive promised dates that are then forgotten. An unavailable part accompanied by regular updates is nothing like fifteen days of silence. A complex problem requiring assistance from the manufacturer is nothing like a seller giving you the manufacturer’s email address and suddenly deciding the problem no longer concerns them. The immediate result may be identical, your machine still does not work, but the quality of the professional is completely different.

On the other hand, be cautious when a pattern begins to emerge: promises made only verbally, dates repeatedly postponed without explanation, commitments changing depending on who you speak to, refusal to put warranty terms in writing, no invoice, pressure to make a bank transfer quickly, after-sales support that stops responding, responsibility constantly pushed onto the manufacturer, repeated requests for you to perform repairs yourself without serious guidance, deposits held indefinitely, or full payment demanded long before the machine even exists.

Do not necessarily judge someone based on one isolated incident. Look at their behavior. A mistake that is acknowledged and corrected inspires more confidence than a professional who officially never makes mistakes because everything is always the fault of the manufacturer, the shipping company, the customer, the weather, Mercury being in retrograde, or the guy who packed the boxes that morning.

And pay particular attention to what happens when you start asking questions. A serious professional may not immediately know the answer, but they can tell you they will find it. Opacity works differently: vague responses, delayed promises, changing contacts, contradictions, and the growing feeling that every simple question now requires a congressional investigation.

A problem is an incident. An organization built around opacity becomes a warning sign. And that warning sign generally does not say, “be patient.”

It says: this smells like trouble.

So, where should you buy your first pinball machine?

For a first new-machine purchase, a good local distributor that can demonstrate genuine after-sales support generally remains the most reassuring route. You may pay slightly more, but you are also buying access to someone who is legally and geographically reachable, capable of preparing your machine, advising you, and above all not disappearing when something stops working. If you are wondering who to contact, check our list of professionals approved by Pinball Xperience. We obviously do not claim that a problem will never occur, but this selection already helps identify businesses that meet the criteria we consider important for purchasing under good conditions.

For your first used machine, a private transaction with a physical inspection can be excellent. You see the actual machine you are going to buy, can check how it works, and discuss its history directly with its owner. If you do not yet know what to inspect, bring someone who knows pinball machines. Spending an hour with an experienced player inspecting the playfield, running diagnostics, looking underneath the machine, and asking the right questions can save you far more money than spending half an hour negotiating €300 off the price.

For a rare or difficult-to-find machine, buying elsewhere in Europe, importing, or even purchasing directly from the manufacturer can make perfect sense, provided you consider the entire equation: shipping, potential taxes, insurance, distance, parts availability, and above all the potential difficulty of after-sales support. An impossible-to-find machine can justify taking additional risk. Going through the same process to save a few hundred euros on a model available locally is much harder to justify.

For a preorder, always look at what actually exists when you pay. An established manufacturer that has already produced and delivered thousands of machines obviously does not carry the same risk profile as a recently created company built around a prototype. And when a manufacturer has never produced a single machine at scale, think differently about your money: you are no longer only a customer, you are also economically participating in its attempt to become a manufacturer.

That can work extremely well. Some new manufacturers become tomorrow’s established players, and their earliest customers will have helped make that possible. But it can also end very badly. A prestigious license, a beautiful prototype, and a successful marketing campaign do not pay suppliers, employees, or for the components required to manufacture several hundred machines.

When in doubt, waiting for the first customer deliveries is not cowardice. You are simply letting someone else test the company’s financial and industrial strength with their money before you test it with yours.

The simplest rule remains the best

The more expensive, distant, complex, and difficult to verify a transaction becomes, the more you should slow down. A good seller is not afraid of questions. A good professional can explain their warranty. A good distributor can tell you how their after-sales service works. An honest private seller can show you the machine. A serious manufacturer can explain its production schedule. An importer should be able to tell you who invoices what. And a company asking you for several thousand dollars or euros before delivering anything should be able to provide answers with a level of precision proportional to the amount of money it is asking from you.

You have no obligation to finance uncertainty.

There will be other machines.

The bad purchase is not always the one where you paid €500 too much. It is the one where, after paying, you discover that you did not even know exactly who you had bought your pinball machine from.

Thus have I spoken.

Lazarvs

The author

Lazarvs

Fondateur de Pinball Xperience. Joueur. Collectionneur. Créateur. Le flipper comme jeu, culture et industrie. PLAY. LEARN. CONNECT.

View profile