PX Lexicon™
A
- Anti-Reflective Glass
Playfield glass with an optical coating designed to significantly reduce reflections and improve visibility of the playfield.
- Art Blade
A printed decorative panel installed along the inner left and right cabinet walls beside the playfield. Art blades extend the machine’s artwork into the interior cabinet area.
B
- Backbox Bolt
A bolt used to secure the backbox in its upright operating position after it has been raised.
- Backbox Decal
Printed artwork applied to the exterior sides of the backbox. The artwork may vary between different editions of the same machine.
- Backbox Hinge
The metal hinge connecting the backbox to the cabinet. It allows the backbox to fold down for transportation and be raised into its operating position.
- Backbox Latch
A mechanical fastening device used to secure or retain the backbox in a specific position.
- Ball Guide
A component, often made of metal, used to contain and direct the ball along a defined playfield path.
C
- Cabinet Decal
Printed artwork applied to the exterior surfaces of the pinball cabinet. Cabinet decals form a major part of the machine’s visual identity.
- Cabinet Speaker
A speaker mounted inside the main cabinet rather than in the backbox speaker panel.
- Cash Box
A removable container inside the cabinet used to collect coins accepted by the coin mechanisms.
- Coil Stop
A metal component that limits plunger travel and absorbs the impact at the end of its stroke.
- Coin Chute
A channel that guides an inserted coin toward the validation mechanism or coin box.
- Coin Door
The metal access door located on the front of the cabinet. It houses the coin mechanisms and provides access to service controls and various internal components.
- Coin Door Interlock Switch
A safety switch that detects when the coin door is open and may disconnect higher-power circuits to reduce electrical and mechanical hazards during servicing.
- Coin Funnel
A component that directs coins through the coin-door assembly toward the appropriate mechanism or collection area.
- Coin Mechanism / Coin Mech
A device that validates an inserted coin and signals the machine to add the corresponding credit when the coin is accepted.
- Coin Meter
A mechanical or electronic counter used to record coin or credit activity for auditing and commercial operation.
- Coin Return
The mechanism or opening through which a rejected or released coin is returned to the player.
- Coin Slot
The opening through which a player inserts a coin into the machine’s coin mechanism.
- Connector
A component used to create a removable electrical connection between wires, circuit boards, or other electrical devices.
- Convolux
Brand of fluorescent plastic protectors for pinball machines, offered for many titles. Fitted to the machine, they react to lighting and reach their full intensity under LEDs, adding depth and glow to the playfield.
- CPU Board
The main processing board responsible for executing the machine’s software and coordinating its various electronic functions.
D
- DMD Panel
The backbox panel designed to house and support the Dot Matrix Display.
- Dot
An individual illuminated point within a dot matrix display. Multiple dots combine to create numbers, letters, graphics, and animations.
- Dot Matrix Display, DMD
A display made from a matrix of illuminated dots used to show scores, text, graphics, and animations. It became a defining display technology for pinball machines beginning in the 1990s.
- Driver Board
An electronic board responsible for controlling output devices such as coils, lamps, motors, and other powered components.
E
- Electronic Coin Mech
An electronically controlled coin validator that uses sensors to identify and accept compatible coins.
F
- Flap
A small hinged piece used to provide a smoother transition between two ball-travel surfaces.
- Flipper Base Plate
A metal mounting plate beneath the playfield that supports the primary components of the flipper mechanism.
- Flipper Bat
The visible flipper component that directly contacts and propels the ball.
- Flipper Bushing
A playfield-mounted bushing through which the flipper shaft passes, keeping the shaft aligned and minimizing unwanted movement.
- Flipper Link
A linkage connecting the plunger to the flipper mechanism, converting the plunger’s linear movement into rotational movement of the flipper bat.
- Flipper Pawl
A clamping component attached to the flipper shaft that transfers motion from the linkage to the flipper bat.
- Flipper Plunger
A movable metal rod pulled into the flipper coil when energized, generating the mechanical motion required to operate the flipper.
- Flipper Rebuild Kit
A set of replacement wear components used to restore the mechanical performance of a flipper assembly.
- Flipper Return Spring
A spring that returns the flipper bat and mechanism to their resting position after the coil is de-energized.
- Flipper Shaft
The metal shaft connecting the visible flipper bat to its operating mechanism beneath the playfield.
- Fuse
A protective electrical device designed to open a circuit when current exceeds a specified value, helping protect wiring and components from damage.
G
- Gate
A small movable playfield component used to control or restrict the ball’s passage along a particular path.
- Gate Wire
The movable wire component of a playfield gate that physically interacts with the ball as it passes.
- Glass Lift Channel
A channel attached to the edge of the backbox glass that helps secure the glass and provides a means of lifting or handling it during removal and installation.
L
- Lane Guide
A playfield component used to define a lane and guide the ball along a specific path.
- LCD Backlight
The light source positioned behind an LCD panel that illuminates the display and makes the image visible.
- LCD Panel
The assembly containing the LCD screen and the components required to mount and integrate it into the backbox.
- Leg
One of the four metal legs that support the pinball cabinet. The two front legs and two rear legs can be adjusted in height using the levelers.
- Leg Bolt
A bolt used to secure a metal leg to the pinball cabinet. Each leg is typically attached to the cabinet with two leg bolts.
- Leg Bolt Washer
A washer placed between the leg bolt head and the pinball leg. It distributes the clamping force and helps secure the leg firmly against the cabinet.
- Leg Leveler
An adjustable threaded foot installed at the bottom of each leg. Leg levelers are used to level the machine and adjust its front-to-back and side-to-side pitch.
- Leg Protector
A protective piece installed between the metal leg and the cabinet. It helps prevent scratches, dents, and artwork damage caused by tightening or movement of the leg.
- Liquid Crystal Display, LCD
A color liquid-crystal display used in modern pinball machines to present scores, animations, video, rule information, and player progression.
- Lockdown Bar
The large metal bar located at the front of the cabinet, directly in front of the playfield glass and above the coin door. It secures the front of the glass and also serves as the area where players commonly rest their hands or forearms.
- Lockdown Bar Lever
A lever accessible through the open coin door that releases the lockdown bar, allowing the playfield glass to be removed for access to the playfield.
- Lockdown Bar Receiver
The mechanism mounted inside the front of the cabinet that the lockdown bar engages with. It locks the bar securely in place during normal operation.
- LVDS Cable
A cable using Low-Voltage Differential Signaling to transmit digital video data to an LCD display on compatible pinball hardware.
M
- Metal Guide
A metal playfield guide used to physically define and control specific ball paths.
- Molex Connector
A common pinball-industry term for various connector families manufactured by Molex and widely used in machine wiring harnesses and board connections.
- Mylar
A clear adhesive plastic film applied directly to selected areas of the playfield to protect the surface from wear caused by repeated ball travel and impacts. It may cover only high-wear areas, such as around pop bumpers or slingshots, or a much larger portion of the playfield. Unlike a removable Playfield Protector, Mylar is adhered directly to the playfield surface and must be removed carefully to avoid damaging the clearcoat, inserts, or artwork.
N
- Node Board
A distributed electronic board that locally manages input and output devices within a modern pinball control architecture.
O
- One-Way Gate
A gate designed to allow the ball to travel through in one direction while preventing it from returning in the opposite direction.
P
- Plastic Set
A complete or partial set of decorative plastic pieces used throughout a machine’s playfield.
- Playfield Back Panel
A vertical panel located at the rear of the playfield that may support lighting, artwork, decorative elements, or hardware.
- Playfield Glass
The large sliding glass panel installed above the playfield. It closes the top of the cabinet, protects the playfield and its components, and provides a clear view of the playing surface.
- Playfield Hinge
A mechanical hinge used on some pinball designs to allow the playfield to pivot for service access.
- Playfield Pivot
The pivot point around which the playfield rotates when moved between its normal playing position and a service position.
- Playfield Plastic
A typically clear or printed plastic piece mounted above the playfield for decoration, protection, or to define specific play areas.
- Playfield Prop Rod
A support rod used on some machines to mechanically hold the playfield in a raised service position.
- Playfield Protector
A removable transparent protective sheet, typically made from a technical plastic material and precisely cut to match the playfield geometry. It sits directly above the original playfield surface, creating a physical barrier between the ball and the playfield to reduce wear, scratches, and impact damage to the clearcoat and inserts. Unlike Mylar, a playfield protector is not permanently adhered to the playfield and can be removed. Because the ball rolls on the protector rather than directly on the original surface, it may also slightly affect ball speed, rebounds, and certain trajectories.
- Playfield Slide Rail
A rail that allows the playfield to slide forward within the cabinet before being raised into a service position.
- Playfield Support
A support mechanism used to hold the playfield in a raised or service position for maintenance.
- Power Supply
The electrical system that provides the regulated voltages required by the machine’s electronic and electromechanical components.
- Printed Circuit Board, PCB
A board containing conductive tracks and electronic components used to perform or support one or more electrical functions within the machine.
- Protector
A protective piece installed around a high-impact playfield area, such as a ramp or scoop entrance, to reduce wear and damage.
R
- Ramp Bracket
A mounting component used to secure a ramp to the playfield and maintain its correct position and height.
- Ramp Flap
A thin metal flap positioned at a ramp entrance to provide a smooth transition from the playfield surface onto the ramp.
- Rubber Post Sleeve
A cylindrical rubber sleeve fitted around a post to cushion impacts and influence ball rebound.
- Rubber Ring
An elastic rubber ring installed around posts and other playfield components to provide controlled ball rebound and impact absorption.
S
- Score Display
A general term for the display system used by a pinball machine to show player scores.
- Side Armor
Decorative metal trim installed along the sides of the cabinet. It may feature custom paint, graphics, cutouts, or special finishes and is often used to enhance the machine’s visual presentation.
- Side Rail
A long metal trim piece installed along each upper side of the cabinet. It protects the cabinet edges and forms part of the machine’s exterior trim.
- Speaker
An electroacoustic transducer that converts the machine’s audio signal into audible sound.
- Speaker Grille
A perforated protective cover mounted in front of a speaker. It protects the speaker cone while allowing sound to pass through.
- Speaker Panel
The front panel of the backbox that typically houses the speakers and, depending on the machine generation, the DMD or LCD display.
- Standard Glass
Conventional untreated or standard-finish playfield glass. It protects the playfield but can produce noticeable reflections depending on the surrounding lighting.
- Star Post
A star-shaped plastic playfield post commonly used to support rubber rings and define ball paths.
- Subwoofer
A speaker specifically designed to reproduce low-frequency audio, typically mounted inside the lower cabinet.
T
- Topper
An accessory or assembly mounted above the backbox. It may be purely decorative or incorporate lighting, mechanisms, animation, displays, and game-synchronized effects.
- Topper Bracket
A mounting bracket used to securely attach a topper assembly to the top of the backbox.
- Transformer
An electrical component used to convert incoming AC voltage to the voltage levels required by the machine’s various circuits.
- Translite
A printed transparent or translucent artwork sheet mounted behind the backbox glass and illuminated from behind. Unlike a traditional backglass, the artwork is not printed or painted directly onto the glass.
- Translite Channel
A retaining channel used to hold the translite or its glass assembly securely in position within the backbox.
V
W
- Wireform Bracket
A mounting bracket used to secure and support an elevated wireform above the playfield.
- Wiring Harness
An organized assembly of wires and connectors used to distribute power and electrical signals between components throughout the machine.