Pinball Xperience

Tutorial | Installing a Shooter

· Lazarvs

Tutorial | Installing a Shooter
stern pinballpinball xperienceTuto flipperpinball tutorialPX WorkshopElvira's House of Horrors

Tutorial | Installing a Shooter

Hawkeye: Sir, I notice you’re a beer drinker. Would you care to share a martini with me?
Trapper: Martini? I’d love a martini.
Hawkeye: Ho-Jon, bring this gentleman a martini. I think you’ll find them quite dry.
Trapper: Don’t you put olives in them?
Duke: Olives? Where do you think you are, man?
Hawkeye: We have to make certain concessions to the war. We’re only three miles from the front lines.
Trapper: Sure. But you can’t really enjoy a martini without olives.

Trapper then puts down his glass, casually pulls a small jar of olives from his pocket in front of his astonished hosts and concludes: “Otherwise, it’s not... quite the same.”

M*A*S*H.

In 1970, Robert Altman released the magnificent M*A*S*H, a ferocious, irreverent and brutally funny satire following a group of military surgeons who are as brilliant and indispensable when it comes to saving lives as they are utterly incapable of seriously conforming to the world around them. Sound like anyone you know? The movie takes place during the Korean War, just a few miles from the front, in an environment where you could reasonably assume that whether or not there’s an olive in your martini would rank fairly low on the list of urgent problems. And yet, for Trapper, it matters. Not because the olive is essential, but because without it, things simply aren’t quite the same.

What does any of this have to do with pinball? Almost nothing, except that this scene perfectly sums up how we feel whenever we look at our Elvira’s House of Horrors Limited Edition with its original shooter. It works perfectly, does exactly what it was designed to do and launches a ball every single time we ask it to. Objectively, our pinball machine is missing absolutely nothing. Except now we’ve found the olive. And once you know the olive exists, suddenly your martini isn’t quite the same anymore.

And today, we’re going to put it in. No, there’s absolutely no double meaning there... Well, there is now that I’ve pointed it out. So I probably shouldn’t have pointed it out. Wait... did I just write that out loud? Shit.

PIMP MY ELVIRA, THE SEQUEL TO THE SEQUEL OF PART ONE

A promise is a promise! We told you we were putting together a little trilogy dedicated to plug-and-play accessories and mods, so we’re continuing our perfectly rational endeavor of removing completely functional parts from a pinball machine and replacing them with other completely functional parts that happen to look much better. After the Speaker Light Kits, this time we’re going after the shooter, or ball launcher, with an installation simple enough to make an excellent first intervention if you’re not yet used to getting your hands inside your machine.

For this second installment, we’ve chosen the easy route because there’s absolutely no electrical wiring involved. There are illuminated shooters available for machines such as Jurassic Park, Stranger Things and Avengers, but those require an additional electrical connection and usually cost considerably more as a result. Depending on the model, they can use different lighting effects, including translucent or electroluminescent elements, allowing the shooter to become an even stronger part of the machine’s visual identity. But that’s another story. Today, we’re doing DIY for ordinary mortals: a few screws, one shooter and normally no reasonable possibility of setting anything on fire.

WHATCHA GONNA NEED TO ORDER?

We chose the official Stern shooter designed for Elvira’s House of Horrors. Logically, the first idea would therefore be to go directly to Stern and order the part. On paper, the equation seems almost biblical in its simplicity: Stern sells the pinball machine, Stern offers the accessory, Stern has a store and we have a credit card. Every ingredient required for a reasonably normal commercial transaction appears to be present.

When we originally performed this installation, reality was a little more... folkloric. Understanding the availability of certain Stern accessories could occasionally feel more like commercial archaeology: some references remained listed despite having been unavailable for ages, while others existed somewhere in the distribution network without necessarily being clearly available through the online store. Elvira’s House of Horrors was released in 2019, so finding certain official accessories could require considerably more digging than you might reasonably expect.

For us Europeans, there was another joyful little detail to add to the equation. Ordering a small part directly from the United States can turn an initially reasonable price into something considerably less entertaining once shipping, taxes and possible import fees join the party. So we went through our usual dealers until we finally found our Holy Grail. Or rather, since we’ve apparently committed ourselves to this metaphor now, our olive.

UNBOXING DAYYYYY!!!

Three days after placing the order, the package finally arrives. Even when you know perfectly well that there’s nothing inside except a ball launcher, there’s always something slightly ridiculous about the excitement of opening a new accessory for your pinball machine. Pictures can give you a general idea, but they never really tell you what a part will look or feel like once it’s in your hands, much less whether the finish will be convincing enough to deserve a place on a machine in this price range.

In our case, the main concern was that infamous clown head. A mediocre sculpt, cheap material or sloppy paint job would have been enough to turn the whole thing into a magnificent example of a terrible good idea. So we open the box with a certain amount of apprehension and, good news, the first impression is excellent. The shooter is properly packaged and protected for shipping and comes with a relatively basic installation guide. For once, though, it’s difficult to criticize the manufacturer for not including an engineering thesis: we’re going to remove three screws and then put them back. If you require a 180-page technical manual for this operation, Stern may no longer be the problem.

Once the shooter is out of the box, the perceived quality confirms that first impression. The material feels soft and pleasant in the hand, the whole assembly feels solid, the paint has been applied cleanly and there are no obvious blemishes spoiling the details of the sculpt. Turn it over and you immediately see the three mounting points used to secure it to the cabinet. Three screws. That’s it. Can you already feel that warm sensation of technical competence beginning to wash over you? Enjoy it. It may not last.

GETTING READY

Merlin: First of all, wood, I say yes. But fabric, I say be careful.
Arthur: Why?
Merlin: Durability.
Arthur: Dura... durability compared to what?
Merlin: Compared to wood. If you treat wood properly, it’s a material that won’t let you down. Fabric, once it’s worn out, there’s nothing you can do.
Arthur: Uh, yeah. Okay, fine, except I don’t care. That’s not what I’m asking. We’ll figure out how to build the panels later! What I want to know is whether you can enchant them so we can hide behind them.
Merlin: What you want is, when you go behind the panel, whether it’s wood or fabric, we’ll figure out which is best, you disappear.
Arthur: ...Yes.
Merlin: Well, you don’t need to enchant them for that.
Arthur: What do you mean? Of course you do.
Merlin: No. Let’s say you build your panels. You make a wooden frame. Make sure you treat the wood properly, otherwise the moment it rains it’ll swell. Don’t forget, wood is a living material! Then you cover the frame. Either with fabric, which I wouldn’t recommend, or with little wooden boards. Basically, you make a kind of floor. That way it’s all wood. Then you cover the whole thing and you’ve got your panel. Look, let’s say this is my panel. See? If I stand behind it, I disappear.
(Arthur smacks Merlin with the animal hide he was holding.)

For our American readers wondering what the hell just happened, this is a reference to Kaamelott, a French cult comedy series created by Alexandre Astier. Its version of the Arthurian legend turns King Arthur’s court into an administrative nightmare populated by knights and advisors whose staggering incompetence regularly drives Arthur to despair. Merlin, despite supposedly being the great wizard of legend, is one of its finest specimens. The joke here is therefore fairly simple: we’re about to explain an extremely basic operation with the same magnificently unnecessary complexity.

Let’s be clear: installing this shooter requires almost no technical skill whatsoever. The hardest part will probably be opening the pinball machine properly, removing the glass and raising the playfield. Still, this part deserves some attention because it’s often when something seems obvious that you forget the one tiny detail capable of turning a five-minute job into a magnificent moment of solitude. If you need more help with this part, refer to our tutorial on how to raise a pinball playfield.

Merlin: Oh, okay, but you don’t need to enchant anything for that. In that case, make your wooden frame, treat the wood, that’s absolutely essential if you want it to last, and then don’t put anything over it. Leave it open. That way you can see through it and see what’s behind...
(Arthur hits Merlin with his bare hands.)

Before doing anything else, unplug your pinball machine from the wall outlet. We’re not making any electrical connections here, but getting into the habit of doing this whenever you work inside a machine is simply good practice. The pinball machine isn’t merely switched off: it is unplugged. You can then release the lockbar latches, remove the lockbar and carefully slide out the glass before placing it somewhere it has absolutely no chance of falling or encountering an overly enthusiastic object, pet or human being.

STEP 2 | REMOVE THE BALLS

Some machines offer a service-menu function that ejects the balls for you. If yours does, use it, because it makes the whole process considerably easier. Otherwise, the method we used during this installation is to open the coin door and manually operate the eject mechanism to send the balls one by one into the launch lane. You can then simply retrieve them from the playfield.

The point isn’t merely to make your life easier. A pinball has enough mass to damage a playfield decoration if it suddenly goes flying across the machine, and raising a playfield while it’s still full of balls is a remarkably poor way of learning that lesson. Take the few seconds required to remove them all and put them somewhere safe, preferably in a container where they can’t decide to continue their adventure underneath the least accessible piece of furniture in your gameroom

THREE SCREWS AND WE’RE DONE!

This is it. The beast is open, the playfield is raised and the original shooter is now completely accessible from inside the cabinet. And there’s excellent news waiting for you: only three screws stand between us and victory. Grab yourself a long Phillips screwdriver, with particular emphasis on the word “long,” because you’ll understand why the moment you try to reach the mounting screw sitting alongside the cabinet wall.

We recommend starting with the two easiest screws and leaving the one closest to the cabinet wall until last. The slight amount of movement you gain after removing the first two makes that final screw considerably easier to reach. And above all, don’t suddenly start dismantling everything your eyes happen to encounter just because you’re feeling confident now. The two lower nuts visible in this area do not need to be removed. I know. They’re right there. They’re looking at you. They almost seem to be begging you to reach for another wrench. Resist.

Once the three screws are out, hold the shooter from outside the cabinet and gently remove it from its position. Take the new one, place it exactly where the old one was and align its three mounting points with the holes in the cabinet. All that remains is to reinstall the screws and tighten everything properly, without trying to prove your mechanical masculinity through a Phillips screwdriver. The shooter needs to be firmly secured. Nothing more.

And there you go. You’re done. You have officially installed a mod on your pinball machine using three screws and a few minutes of your time. You are entirely entitled to stare at your tools with a degree of satisfaction wildly disproportionate to the actual difficulty of the job. We won’t judge you. We do exactly the same thing.

ALTERNATIVE METHOD | FOR VELOCIRAPTORS

Now, there is a second method for the clever ones, the impatient ones and those of you whose fingernails appear to have been harvested directly from a Velociraptor. Instead of removing the whole assembly, you can simply compress the shooter spring toward the outside of the cabinet to expose the retaining pin, then pull the pin out. If your Cretaceous predator credentials don’t quite live up to your ambitions, a pin punch works perfectly well too and has the added advantage of preserving what remains of your manicure.

Once the pin is removed, carefully release the spring, pull out the original shooter rod and replace it with the new one. Compress the spring again, reinstall the retaining pin and check that the complete assembly has been correctly reassembled and moves freely. Congratulations, you’ve just replaced your shooter without removing its mounting assembly.

This is obviously much faster. With a little practice, you’ll even finish the job faster than your teenager can snatch their allowance out of your hand. You’ll barely have time to understand what just happened before the shooter is installed, your wallet is empty and your kid has already vanished into another room. Your shooter is installed. Play!

VERDICT? DRIVE ME CRAZY!

All right, let’s launch a ball. The first impression is immediately positive: the new shooter offers a more convincing grip than the original, with a more substantial shape and a feel that simply makes it more pleasant to use. On our machine, we also found that the spring resistance lined up rather nicely with the release point required to hit the back door skill shot. Obviously, this doesn’t transform the way the machine plays, and we’re not going to try to sell you three screws and a clown head as a technological revolution. Fundamentally, this shooter does exactly what the one it replaces did: it launches a ball. The sense of control does feel better to us, however, and the object itself is considerably more satisfying to use.

Visually, however, the difference is substantial. The clown head brings a personality the standard shooter simply didn’t have and finishes off a machine whose art direction is built around an accumulation of little details. We’ve always had a weakness at PX for accessories that change absolutely nothing about the actual game but somehow make you feel as though a piece had been missing all along. This shooter belongs squarely in that category. It won’t make you a better player, it won’t alter the layout or ruleset and it certainly won’t magically send your high score through the roof. From a strictly rational standpoint, then, it is completely unnecessary.

And that brings us right back to Trapper. His martini was already perfectly drinkable before he pulled that little jar out of his pocket. Nothing essential was missing, nobody was going to die because of an absent olive and the Korean War could apparently continue without one. But without that damn olive, it simply wasn’t “quite the same.” Our Elvira worked perfectly with its original shooter, and yet now that this clown head is sitting on the cabinet, going back would give us exactly the same feeling. The martini was already good. It was just missing the olive.

That’s why we love this kind of mod. It’s completely unnecessary, which makes it absolutely essential.

Merlin: Anyway, I don’t actually know how to enchant objects either.
(Arthur rolls his eyes in utter despair. Cut to black.)

And for our American readers, yes, that’s Kaamelott again. After spending the entire scene giving Arthur increasingly useless technical advice about his supposedly magical panels, Merlin finally admits that he doesn’t actually know how to enchant objects in the first place. In France, that particular brand of heroic incompetence is practically a national treasure.

Lazarvs

The author

Lazarvs

Fondateur de Pinball Xperience. Joueur. Collectionneur. Créateur. Le flipper comme jeu, culture et industrie. PLAY. LEARN. CONNECT.

View profile