Tutorial | How to lift the Playfield on Your Pinball Machine
· Lazarvs

Tutorial | How to Lift the Playfield on Your Pinball Machine
Lifting a pinball playfield is one of those operations that becomes so natural with experience that you eventually forget what the first time felt like. That first time when you remove the lockbar, slide out that enormous sheet of glass while desperately trying not to think about how much it costs, and suddenly find yourself standing in front of a playfield worth several thousand dollars realizing that you now have to lift the whole damn thing. For this demonstration, our willing victim will be a Pokémon LE, which seems appropriate enough since we’re about to spend the next few minutes lifting several dozen pounds while trying very hard not to catch a single ball.
The operation itself is not complicated. You simply need to know a few basic moves, understand where to place your hands and avoid the two or three spectacularly bad ideas that tend to occur when you first discover the inside of a pinball machine. Yes, the playfield was designed to be lifted. No, you are not going to break your machine if you open it correctly. And no, that beautiful plastic ramp apparently reaching out toward you was not installed by the manufacturer to serve as a handle.
The classic mistake is forgetting to remove the balls before lifting the playfield. You remove the lockbar, slide out the glass, proudly grab the playfield and begin lifting when suddenly: CLONK. CLONK CLONK CLONK. Every metallic Poké Ball in the machine simultaneously discovers Gravity, except Sandra Bullock isn’t around to save the situation. Best case scenario, you scare the hell out of yourself. Worst case, one of those balls just used Tackle on a $150 playfield decoration, and unlike the video game, you can’t simply take it to a Pokémon Center and have Nurse Joy repair it for free. So before we lift anything, we’re going to prepare the machine properly.
STEP 1 | CUT THE POWER, PIKACHU
Before doing anything else, switch the machine off and unplug it from the wall outlet. We’re not performing any electrical work here, but making this an automatic habit whenever you work inside a pinball machine is simply good practice. A modern machine contains enough electronics, coils and wiring that your first expedition underneath the playfield really doesn’t need your own interpretation of Thunder added to the experience.
Open the coin door to release the lockbar latches, then remove the lockbar itself. From this point on, keep one hand ready for the glass. Depending on the machine, the playfield glass may remain perfectly still in its rails or decide that the instant the lockbar disappears is an excellent opportunity to begin sliding out all by itself. Anticipate that movement instead of attempting to catch the glass after it has already gathered momentum. Playfield glass is heavy enough that discovering what happens when it meets the floor is an experiment best left entirely theoretical.
Ideally, use clean gloves or two clean, non-abrasive cloths to handle the glass. This isn’t just about grip and safety; it also prevents you from covering the thing with magnificent fingerprints and having to clean the entire surface before you’ve even started working. Slide it carefully out of its rails using both hands, then put it somewhere stable where it cannot fall or be hit by a cat, a rabbit or any other biped currently sharing your home.
Special attention should naturally be paid to your wife, who, after thirty years of never setting foot in that particular room, will choose this exact day to experience an irresistible urge to investigate the precise corner where you so carefully placed the glass for safekeeping. Once she has walked straight into it, she will explain, with the kind of marital bad faith that several decades of practice can elevate into an art form: “Well, what kind of idiot leaves a sheet of glass there?” You may be tempted to point out that she was unaware this particular corner of the house even existed five minutes earlier. I would advise against it. PX Academy teaches you how to maintain a pinball machine, not how to save a marriage.
STEP 2 | GOTTA CATCH ’EM ALL... BUT GET THEM OUT FIRST
This step deserves a little historical detour because, when the original version of this tutorial was published, it earned me a mountain of criticism, some beautifully condescending sarcasm and my first insults from within the pinball community. Apparently, explaining how to remove the balls before lifting a playfield was somehow offensive. For some experienced players, it was so obvious that spending a few lines explaining it was considered ridiculous. I had committed a terrible crime: writing for people who didn’t already know.
Years later, it has actually become one of the passages I’m most proud of. Behind that deliberately basic explanation was a conviction that has never changed: a beginner should never be embarrassed about being a beginner. Nobody is born knowing how to pull out a playfield, identify a coil, navigate a diagnostic menu or understand why several pinballs suddenly rolling down a tilted playfield can destroy hundreds of dollars’ worth of decorations. All of this has to be learned. And if a tutorial claims to teach something, it should begin where the person who doesn’t know actually stands, not where a few self-appointed guardians of the temple believe they should already be.
So yes, I’ll continue explaining obvious things to people for whom they aren’t obvious yet. Those who already know can simply keep reading. But the person who has just received their first pinball machine, who still puts a slightly hesitant hand on the glass and simply wants to learn without having to apologize for being new, that is exactly who PX Academy exists for.
Back to our Poké Balls. Some machines include a service-menu function that allows you to eject the balls. If yours does, use it. Otherwise, open the coin door and locate the ball eject mechanism. You can operate it manually to send the balls one at a time into the launch lane, where you can retrieve them safely. There’s no need to shake the machine like Ron Weasley trying to get a broken wand to work. Once you know which mechanism to operate, the whole process takes seconds.
The point isn’t simply to make handling the playfield easier. A pinball carries enough mass to damage a plastic, sculpt or other component if it suddenly rolls across a tilted playfield. Take the time to remove every ball and put them in a container deep enough that they can’t escape and continue their adventure underneath the least accessible piece of furniture in your gameroom. Gotta catch ’em all, sure, but preferably not on all fours behind your Godzilla using your phone as a flashlight.
STEP 3 | PROTECT THE CABINET
Before you even begin pulling the playfield toward you, we strongly recommend installing Art Blade Protectors, or another form of protection specifically designed to isolate the sides of the playfield from the inside of the cabinet. They aren’t particularly exciting accessories, but they start making a lot of sense once you regularly pull your playfield out. Repeated movement can eventually mark the inside of the cabinet, the side artwork or the art blades, and damaging your pinball machine while trying to take care of it would be rather unfortunate.
Think of them like a screen protector on your phone. Nobody buys a Pokémon to admire two extra strips of plastic inside the cabinet, but the day the playfield rubs against those instead of your artwork, they suddenly become considerably more attractive. Especially a few years later when you decide to sell the machine and the buyer bends down to inspect a microscopic mark inside the cabinet before very seriously announcing that the price needs to come down by a thousand dollars because “there used to be a knickknack there!”
For our American readers wondering what the hell a missing knickknack has to do with pinball, this is a reference to Le Dîner de Cons (The Dinner Game), Francis Veber’s cult 1998 French comedy. In one famous scene, the gloriously hopeless François Pignon spots a mark on a wall and immediately concludes, with the confidence of a forensic expert, that “there used to be a knickknack there.” In France, the line became one of those instantly recognizable comedy quotes. So when your future buyer discovers a microscopic mark inside the cabinet and starts negotiating $1,000 off the price, congratulations: you’ve found your François Pignon. Except this time, the knickknack is going to cost you real money. Use the protectors.
STEP 4 | LIFT... AND PULL!
You’re now ready to lift the playfield and venture into the guts of your Pokémon. Again, a little explanation is worthwhile because we have seen... how shall I put this... things. Some pinheads possess the fascinating ability to look at a ramp, plastic or decorative element and conclude that this relatively fragile component would make an excellent handle for lifting an entire playfield. It’s a philosophy remarkably close to Jeff Goldblum’s warning in Jurassic Park: you were so preoccupied with whether you could, you never stopped to think whether you should.
A ramp is not a handle. A decoration is not a handle. A Pokémon sculpt is not a handle and, despite Machamp having four arms, none of them has been approved by Stern as an official lifting point. We’re going to use a part of the playfield actually capable of supporting the load.
Place your hand under the apron, around the outhole area. If “apron” and “outhole” just transformed this tutorial into a Klingon manuscript, the PX Lexicon™ is your friend. This section is securely attached to the playfield and gives you a safe place to begin lifting. Apply steady upward force to release the playfield from its resting position inside the cabinet, without any sudden movements and, above all, without using playfield components as leverage.
Once the playfield is slightly raised, do not rest it on the cabinet sides. Underneath the playfield are wiring harnesses, boards, mechanisms, solder joints and an entire little electromechanical ecosystem that doesn’t particularly enjoy being crushed between two pieces of wood. Keep lifting until the two large metal support rails underneath the playfield are fully visible, then grab them. At this point, both hands should be holding those rails. You’re now ready to pull the playfield outward and bring it onto its support pads.
As you begin pulling the playfield toward you, pay very close attention to what you feel: during this movement, you should pass through one, and only one, real point of resistance. You’ll feel the stop and usually hear a perfectly normal little “clonk” as you move past it. That’s the one we want.
If you continue pulling and feel a second resistance, stop. That is not another stop you need to overcome, and it is definitely not an invitation to apply more force. It means you’ve reached the end of the playfield’s intended travel. Keep pulling and the playfield can move beyond its proper position and begin dropping into the cabinet. At which point our friendly little Pokémon tutorial suddenly becomes considerably less entertaining.
The rule is therefore extremely simple: one resistance, you pass it; two resistances, you stop. Do not attempt to discover what lies beyond the second one. This isn’t a secret level. There’s no Mew or Master Ball hidden back there.
Once that first and only resistance has been passed, position the playfield correctly on its supports and gradually raise it toward the backbox while controlling its movement all the way. Support the weight, make sure nothing gets caught and place it into the machine’s intended service position. Don’t launch it into the backbox like Team Rocket after yet another failed attempt to capture Pikachu. Your pinball machine is not a deck chair, and the playfield is not being blasted off again.
There you are. For the first time, you can look underneath your playfield and discover that the magnificent, colorful universe visible from above looks, from underneath, roughly like C-3PO exploded inside a hardware store. Wires everywhere, coils, boards, connectors, mechanisms and enough screws to immediately convince you not to touch a damn thing. That’s normal. Give it a few months and you’ll look at all of this very differently.
STEP 5 | BACK DOWN TO EARTH
Once your work is finished, you obviously need to return the playfield to its normal position. This is often where beginners discover that pulling the playfield out was actually the easy part. The stop you passed a few minutes earlier may offer a little resistance on the way back, but nothing here requires you to start forcing things like Kratos opening a chest.
Lower the playfield slowly while controlling its weight until the pads on the metal support rails rest on the cabinet edge. Guide the playfield back inside the cabinet until it is almost horizontal, then progressively push it toward the back. You will eventually meet the stop you passed when pulling it out. Depending on the machine, the playfield may need a slight adjustment before it slips properly back into position.
If your machine has a handle behind the back panel that allows you to slightly lift the rear of the playfield, use it to help clear the stop. Otherwise, a small but deliberate and controlled forward movement can help everything return to alignment. Basically, you need to apply some force, but not too much; commit to the movement without going full caveman. You don’t need to be fragile about it, but there’s also no requirement to prove that you’re the alpha male of the gameroom. The important words are gentle, firm and controlled. We’re putting a pinball playfield back into position, not reenacting Tom Cruise in Cocktail. Nobody expects you to finish by throwing a bottle over your shoulder.
Once the playfield has returned to its normal position, visually check that it is correctly seated inside the cabinet, that the hooks are properly positioned and that nothing appears trapped or pinched. You can then return the balls to the machine, carefully reinstall the glass, replace the lockbar and secure its latches. Take a few seconds to inspect everything one final time before reconnecting the power cord and switching the machine back on.
YOU JUST LIFTED YOUR FIRST PLAYFIELD
That’s it. Nothing exploded, Pikachu didn’t electrocute anyone and you didn’t turn your playfield into a several-thousand-dollar coffee table. You have simply completed one of the most basic operations in pinball ownership, but also one of the most important because it literally gives you access to almost everything you’ll learn next: cleaning, replacing rubbers, servicing flippers, changing a switch, installing a mod, diagnosing a fault or simply inspecting the machine mechanically.
A few months from now, lifting this playfield will feel as natural as removing the lockbar. But if today you spent five minutes staring at your Pokémon before finally daring to pull the playfield toward you, this tutorial was written for you. Those who already knew how to do it never needed it. Everyone else just gained a level. No spectacular evolution just yet. You haven’t gone from Magikarp to Gyarados overnight. Give yourself some time. You’re in the right pinball Trainer Academy.

The author
LazarvsFondateur de Pinball Xperience. Joueur. Collectionneur. Créateur. Le flipper comme jeu, culture et industrie. PLAY. LEARN. CONNECT.
View profile