Tutorial | Installing an Illuminated Shooter on Stranger Things
· Lazarvs

Tutorial | Installing an Illuminated Shooter on Stranger Things
Putting your hands inside your pinball machine for the first time always comes with that brief moment of hesitation. As long as we’re talking about wiping down the playfield or replacing a ball, everything is fine. The moment a screwdriver, a few connectors and, worse still, an electronic board enter the equation, your imagination starts working overtime. You can already picture the connector plugged in backwards, smoke pouring out of the cabinet and several thousand dollars’ worth of beloved pinball machine being transformed into an educational demonstration of what happens when you wire something incorrectly.
Fortunately, reality is considerably less dramatic... at least in principle. A modern pinball machine is designed to be maintained, disassembled and repaired. Plenty of routine jobs are perfectly accessible as long as you work methodically, take your time and follow a few basic precautions. Installing an illuminated shooter is an excellent example. And as an added bonus, it looks goooood.
We’re going to install Stern’s official shooter. This modification is interesting for several reasons because the new shooter does more than simply replace the original handle. It incorporates its own lighting along with two UV LEDs designed to visually extend the Upside Down effect when the machine is already equipped with the UV kit.
The objective of this tutorial is therefore twofold: install the accessory properly, but above all demonstrate that a modification involving both mechanical work and an electrical connection remains perfectly achievable without an engineering degree.
A SHOOTER THAT DOES MORE THAN CHANGE THE LOOK
The shooter is one of the few components on a pinball machine that you physically handle during every game. Changing it is therefore never entirely cosmetic. A larger model can alter the grip, the feel of launching the ball and, obviously, the overall appearance of the machine.
On Stranger Things, there’s more to it than that. The Stranger Things Shooter Knob incorporates the visual identity of the license while adding UV lighting directly beneath the handle. On a machine where part of the staging revolves around transforming the playfield when the Upside Down takes over, the idea makes sense: the shooter itself becomes part of that transformation.
We chose the official Stern part. Availability wasn’t exactly Stern’s strongest suit when we originally performed this installation, and some accessories could require a considerable amount of patience before reaching dealers. Nothing catastrophic, but when an accessory costs around €200, expecting something slightly more elaborate than a part dropped into a cardboard box doesn’t seem unreasonable.
THE UNBOXING: THE BARE MINIMUM
Calm down, Nvdgrs, we’re getting there.
The shooter arrives in a plain rectangular cardboard box with virtually no presentation whatsoever. Let’s just say we’re a considerable distance from the Apple unboxing experience. There’s no elaborate presentation and certainly no luxurious packaging, although there is at least an ecological argument to be made for avoiding packaging that would end up in the trash five minutes later. Things become rather harder to defend when you discover the documentation.
Inside, the shooter is protected by a plastic bag. A second bag contains the required wiring along with a specific metal plate. This plate is essential because, unlike the factory part, it allows the illuminated shooter’s wiring to pass through into the cabinet.
And then comes the instruction sheet...
It’s in English, which obviously isn’t a problem in itself. The slightly more entertaining detail is that it simply doesn’t correspond to the product. The instructions explain how to install a mechanical shooter without lighting and therefore provide absolutely no information about the electrical connection we actually need.
The Stern style of the era in all its glory: here are the parts, good luck, see you later.
The installation itself isn’t remotely complicated. A single sheet identifying the correct connector would have been enough. At this price point, expecting documentation that actually corresponds to the product would hardly have been extravagant.
Once that little documentation adventure is behind us, the product itself makes a much better impression. The shooter is substantial, noticeably larger than the photographs suggest, and its construction immediately inspires confidence. The grip feels good, the finish is excellent and the whole assembly genuinely looks like it belongs on the machine rather than something added as an afterthought.
Beneath the handle are two small UV LEDs. They’re discreet enough not to compromise the design when the machine is switched off, while their position allows them to illuminate the shooter area directly when the effect is activated.
So the verdict before installation is rather amusing: excellent accessory, hopeless documentation. Time to get the tools out.
INSTALLATION
BEFORE ANYTHING ELSE: CUT THE POWER
“Mademoiselle Deray, I must inform you that this article will be fully illustrated.” (French joke)
We’re not going to repeat the entire procedure for removing and raising the playfield, as we’ve already covered that in our previous tutorials, including our guide to installing Speaker Light Kits. There is, however, one rule where there is absolutely no room for improvisation:
Before carrying out this type of work, the pinball machine must be switched off AND unplugged from the wall outlet.
Not merely switched off using the power switch. Unplugged.
We’re going to be working close to electrical components and will later make a connection directly to an electronic board. There is absolutely no reason to work on the machine while it remains connected to mains power. Make unplugging the machine an automatic habit whenever you perform this kind of work.
Once the machine is unplugged and the playfield has been properly raised and secured, we can access the inside of the cabinet behind the shooter.
STEP 1 | CLEAR THE WORK AREA
“Can’t be done, boss. The thing’s broken. Bestel tried connecting his shooter to the credit card terminal and screwed everything up.”
This installation differs slightly from replacing a conventional mechanical shooter. We not only need to remove the original ball launcher, but also replace its metal mounting plate so the wiring for the new model can pass through.
Access to the mounting screws isn’t ideal with the flipper button contacts in place, so we recommend removing them first if they’re getting in your way. Otherwise, simply move on to the next step.
Before touching anything, look carefully at their original position. Taking a quick picture with your phone is also a very good idea. This simple habit quickly becomes one of the most useful tools a pinball owner can have: whenever you’re dismantling something whose assembly you don’t know perfectly, photograph it first.
Carefully unscrew the flipper button leaf-switch assemblies. The solder joints at their base are relatively fragile, so don’t pull on them or leave them hanging by their wires. Once removed, simply move them safely away from your working area.
You should now have much easier access to the shooter assembly.
STEP 2 | REMOVE THE ORIGINAL SHOOTER
Begin by removing the screws securing the shooter and its metal plate to the cabinet. Keep one hand on the shooter while doing this. Once the final fasteners have been removed, nothing will be holding it in place, and discovering how impact-resistant a shooter is by dropping it onto the floor provides no information that is particularly essential to your existence.
Once the shooter is free, carefully remove it from the cabinet. Finish by removing the remaining screws securing the original metal plate.
At this stage, the opening should be completely clear. Take a few seconds to observe how everything was originally positioned. Once again, the objective isn’t to work quickly. It’s to work cleanly.
STEP 3 | PREPARE THE NEW SHOOTER
The new shooter has two wires that need to pass through the cabinet. This is why Stern supplies a different metal plate from the factory-installed one.
Before tightening anything, dry-fit the various components. You’ll immediately understand how the wires need to be routed and which way around the replacement plate should be installed.
Hold the shooter and separate the wires: Insert the new shooter through the cabinet from the outside while simultaneously feeding its wiring inside. Separate the two harnesses so that one passes to the left and the other to the right. This allows the plate to sit correctly without crushing the wires.
Position the replacement plate: Hold the shooter in place from outside the cabinet and position the new metal plate from inside. The wires should pass cleanly through the provided openings. Make absolutely sure that no cable is trapped between the plate and the cabinet. A crushed wire can damage its insulation and turn an extremely simple installation into an exceptionally stupid failure a few weeks later.
Secure the plate: Once everything is correctly aligned, install two or three screws without fully tightening them. They’ll hold the assembly in place and free up your hands. Check the shooter’s position one last time from outside the cabinet, then gradually tighten everything. There’s no need to tighten the screws as though you were assembling a suspension bridge. The part needs to be firmly secured. Nothing more.
You can now reinstall the flipper button contacts if you removed them earlier. Continue to handle the leaf switches and their solder joints carefully.
Mechanically, the new shooter is now installed.
ELECTRICAL CONNECTION
STEP 4 | CONNECT THE SHOOTER
“Can’t be done, boss! Bestel tried something. He plugged the beer tap into the pinball machine and it went ‘Pffttt.’”
We’ve reached the part that tends to intimidate beginners the most: connecting something to the machine’s electronics. And yet this is actually the easiest part of the entire installation.
The pinball machine must, of course, still be unplugged from the mains.
Take the cable supplied with the shooter..
Connect one end to the new shooter’s wiring harness. The connectors are keyed, meaning that when correctly oriented they should fit together naturally. If you find yourself having to apply significant force, stop and check the orientation. An electrical connector is not a test of strength.
Next, route the cable neatly toward the electronic board located on the left-hand side of the cabinet. Don’t leave it hanging loose among mechanical assemblies or anywhere it could become trapped when the playfield moves.
The connection is made to CN15, located toward the bottom of the relevant board. Identify CN15 before connecting anything. Check the marking directly on the board and make sure you’re using the correct connector. Then insert the plug without forcing it.
That’s it.
Secure the remaining cable so it cannot move freely inside the cabinet. Don’t leave a loop hanging near a mechanism, coil or anywhere it might be caught when you lower the playfield.
BEFORE SWITCHING IT BACK ON: FINAL CHECK
Don’t immediately reconnect the machine. Take a few seconds to inspect your work from beginning to end.
Check that the shooter is securely mounted, that both flipper button contacts have been reinstalled if you removed them, that no wires are trapped beneath the replacement plate, that the shooter harness is correctly connected, that the CN15 connection is fully seated and that all excess cable has been properly secured.
You can now return the playfield to its normal position, close the machine, reconnect the power cord and only then switch the pinball machine back on.
If everything has been installed correctly, your new shooter should illuminate and operate normally.
THE RESULT ON STRANGER THINGS
Once the machine is back on, the appeal of the accessory becomes considerably more obvious than it ever was sitting inside its cardboard box.
The shooter provides an immediate practical improvement: its size and shape offer an excellent grip. On Stranger Things, however, its greatest contribution is visual. The small UV LEDs extend the atmosphere of the Upside Down into the shooter area and add another layer of cohesion to a machine already equipped with the UV kit.
Obviously, this isn’t an accessory that the machine needs in order to function. Your Stranger Things isn’t going to become a better or deeper game simply because its shooter lights up. But when you start personalizing a machine you intend to keep, details like this are what allow you to push its visual identity that little bit further.
More importantly, if you were reluctant to perform this kind of installation yourself simply because a cable needed to be connected to an electronic board, you’ve now seen just how accessible the operation really is.
A screwdriver, a few precautions, a little method and, above all, no rushing.
Becoming self-sufficient when maintaining a pinball machine often begins exactly like this. First you replace a shooter. Then some rubber rings. Then a flipper assembly. One day you find yourself with your head buried inside the cabinet holding a multimeter and wondering exactly when all of this got out of hand.
Welcome to the hobby.

The author
LazarvsFondateur de Pinball Xperience. Joueur. Collectionneur. Créateur. Le flipper comme jeu, culture et industrie. PLAY. LEARN. CONNECT.
View profile