Mordor Took My Hobbit: How to Replace the Battery on a JJP That Won’t Boot
· Lazarvs

MORDOR TOOK MY HOBBIT: HOW TO REVIVE A JJP THAT WON’T BOOT
A day like any other in the game room. I power up my pinballs, “Run the PX protocol”, the AI executes, the ritual is well oiled. Everything lights up, everything shakes itself awake, everything hums. Then comes the drama. Mordor has laid its hands on my Hobbit, and the Ring has apparently decided that nobody would play that morning. The machine refuses to launch. It doesn’t sulk, it doesn’t shut down, it just sits there in front of me looking like a Nazgûl on sick leave.

This is what you see on the screen. This message is no curse, it’s a battery giving up the ghost. At Jersey Jack Pinball, a PC runs in the back of the machine, and that PC carries a lithium coin cell battery. It stores the motherboard’s settings. One day, without warning, it decides to quit.
Two scenarios then open up to you. The first: total blackout, black screen, cathedral silence, and then, good luck. The second, the one in my game room: the machine shows you this message and leaves you a way out. In that case, head to the shop for a CR2032 battery. The reference is printed on the battery itself, and it costs next to nothing. No need to go forge it in Mount Doom. Add a rubber keyboard at 15 bucks and we’re equipped to fix the Hobbit.
I’ll show you how to restart a Hobbit that has no desire whatsoever to go on an adventure. And rest assured, no dwarf tossing is on the program.
Rule number one: the machine stays on
This point differs from everything I usually tell you, so remember it well. For this operation, your pinball must be powered on before you intervene. Never change the battery with the machine off. In the best case, you lose the saved scores. In the worst case, you treat yourself to a complete system reinstall, and then the Shire will feel very far away.
Step 1: getting into the Hobbit’s belly
With the machine on, remove the lockbar and the glass, then open the coin door. Grab the playfield firmly with both hands, pull it toward you until it stops, then tilt it back and rest it on its safety legs.
Careful, JJP playfields are heavy, and the Hobbit’s weighs about as much as Smaug’s treasure. Take it with both hands, no heroics. Your back will thank you.
One more point: unlike some manufacturers, you don’t have to remove the balls before tilting the playfield. The mechanism holds them in the loader. They stay locked in place, even when the playfield goes backward.
Step 2: locating the USB port and the PC box
Under the playfield, you’ll find a cable with a label reading “USB Update Port”. A small Wi-Fi dongle is plugged into it. We’ll come back to it in a moment.
First, the PC box, that big metal block sitting in the middle of the machine. To remove its cover, unscrew the two nuts on your left. That’s all. Above all, don’t touch the neighboring levers. This operation requires no intervention on that side, leave them alone.
Lift the cover and set it aside somewhere safe. At the back right of the board, next to the fan, you’ll spot a small, round, flat battery. That’s the culprit.
Step 3: plugging in a keyboard before touching the battery
This step comes before the battery change, don’t forget it. Unplug the small USB dongle from the “USB Update Port” and plug in a keyboard instead. This keyboard will be used to restart the machine.
The LCD screen then offers you two options: F1 or F2. Press F2. The machine gets to work on its own. It boots to the green screen and may make some curious noises, since it goes off looking for its balls. Things clack around the launcher, that’s normal, let it do its thing.
Step 4: changing the battery
Find the small metal tab running along the battery and sticking up slightly. It acts as a lever. Press on it to gently lift the battery.
Keep your fingers away from the neighboring components. If you touch the battery itself, no need to worry, even for electricity phobics like me: no shock to expect. The risk starts when your fingers wander elsewhere on the board. Stick to the battery and you risk nothing.
Once the battery is ejected, keep a toothpick handy. With big fingers, the battery slips away easily, and the toothpick helps you lift it just enough to grab it firmly.
Install the new battery, then push it in firmly to clip it into its housing. Firmly, not like a brute: you’re snapping in a clip, not crushing a cave troll.
Step 5: closing up and playing again
Put the PC cover back and tighten the two nuts. Lower the playfield, put the glass and the lockbar back. You’re ready to rediscover the joys of Middle-earth.
Thus have I spoken.

The author
LazarvsFondateur de Pinball Xperience. Joueur. Collectionneur. Créateur. Le flipper comme jeu, culture et industrie. PLAY. LEARN. CONNECT.
View profile