Pinball Xperience
P-ROC

P-ROC

P-ROC, short for Pinball Remote Operations Controller, is a control system developed by Multimorphic beginning in 2009 to allow a computer to run new software on a real pinball machine. According to Multimorphic, it was the first pinball control board sold directly to the public and could replace the CPU in Williams WPC and WPC-95, Sega and Stern Whitestar, and Stern SAM machines while retaining their existing power electronics. Its architecture already separated high-level software, running on a computer connected via USB, from real-time control handled by an FPGA directly on the P-ROC board. This open philosophy played an important role in the growth of homebrew pinball development and established the technological foundation from which the P3-ROC system would later emerge.

P-ROC | Multimorphic

P-ROC occupies an important place in the history of modern programmable pinball. When it appeared in 2009, fundamentally changing the behavior of a commercial machine remained a complex undertaking, as the electronics, software, and protocols used by major manufacturers were still tightly interconnected. Multimorphic developed P-ROC to break this dependency and allow a modern computer to take control of a real pinball machine without requiring its entire electronic architecture to be rebuilt. Rather than creating a system intended exclusively for new machines, P-ROC could replace the original processor in several existing generations and act as an interface between their legacy electronics and an external computer. The game software therefore became independent of the CPU originally installed by the manufacturer. A machine could retain its playfield, coils, switches, display, and much of its power electronics while running entirely different code, directly opening the door to recodes, rethemes, and numerous homebrew projects.

An Architecture Separating Software and Real-Time Control

The fundamental principle of P-ROC is the separation between the host computer and real-time hardware control. The main game software runs on a computer connected to the board via USB and handles rules, scoring, modes, and other high-level functions, while P-ROC provides the interface with the physical machine. This separation directly addresses the constraints of pinball: a flipper, slingshot, or bumper cannot depend solely on the time required for a general-purpose operating system to receive an event, process it, and send a command back. P-ROC therefore includes hardware logic capable of locally managing certain relationships between switches and drivers. The software defines the expected behavior, while the electronics can execute it with minimal latency whenever required.

The FPGA at the Heart of the System

The P-ROC board incorporates an FPGA, or Field Programmable Gate Array, responsible for a significant portion of its hardware functions. Unlike a general-purpose processor executing instructions sequentially, an FPGA can be configured to perform multiple logical operations in parallel. This architecture is particularly well suited to pinball, where numerous switches may change state while drivers are active and other systems continue operating simultaneously. The FPGA allows P-ROC to process these low-level operations without requiring the main computer to manage every electrical detail in real time. This division of responsibilities became one of the foundations of Multimorphic’s technological philosophy and would remain present throughout subsequent evolutions of its architecture.

A Platform Designed for Existing Machines

P-ROC’s original purpose remained strongly connected to legacy architectures. The system can replace the CPU of several major machine families, including Williams WPC and WPC-95, Sega and Stern Whitestar, and Stern SAM. This compatibility allows the power boards and much of the wiring already present in the machine to remain in place. P-ROC then translates commands from the computer into the electronic environment expected by the pinball machine. The objective goes far beyond that of a simple replacement board reproducing the original system: the machine can now execute completely new software. A WPC machine can therefore retain its playfield and hardware while becoming, from a software perspective, a radically different machine.

Recode and Retheme

This capability gives P-ROC a central role in the development of recodes and rethemes. A creator can start with an existing pinball machine, retain its mechanical structure, and rebuild its software environment around new rules or an entirely different theme. The transformation can be extensive without requiring the prior development of a complete electronic architecture. For independent creators, this significantly lowers the technological barrier between advanced machine modification and the creation of an original experience. P-ROC therefore becomes a bridge between modding and programmable pinball development: the playfield retains its physical constraints, but its software identity can be completely rebuilt. This openness directly contributes to the emergence of a community capable of approaching pinball as a development platform.

Switch Management

P-ROC offers several switch configurations to adapt to the architectures it replaces. The board provides direct inputs while also supporting matrix-based configurations. A conventional setup can combine 32 direct inputs with an 8 × 8 matrix, while another retains 24 direct inputs and expands the matrix to 8 × 16. This flexibility is essential for a platform designed to communicate with several generations of machines whose sensor architectures are not necessarily organized in the same way. Depending on the hardware configuration used, total capacity can reach 256 switches, providing substantial headroom for particularly complex machines.

Drivers and Power Control

P-ROC can also manage a large number of drivers, with capacity reaching up to 208 outputs depending on the environment used. Its outputs and complementary power boards can control the main electromechanical components of a pinball machine, including flippers, slingshots, bumpers, kickers, drop targets, diverters, magnets, motors, flashers, lighting, and various peripherals. The platform supports several activation behaviors to meet the requirements of very different mechanisms. A coil can receive a short, powerful pulse, operate with a hold behavior, or use modulation to adjust the power delivered over time. P-ROC can therefore reproduce the expected behavior of legacy architectures while providing developers with significantly greater programming freedom.

Hardware Rules and Responsiveness

One of P-ROC’s essential capabilities is the ability to directly associate a switch event with a driver action. This relationship can be programmed at the hardware level and then executed without waiting for the computer to process each event individually. Flipper behavior provides the clearest example: when the player presses a button, the coil must activate almost immediately to preserve a natural response. Slingshots and bumpers are subject to the same constraints, as even a few additional milliseconds can alter how the ball reacts. P-ROC therefore allows the software to define these behaviors while the electronics directly handle their execution whenever latency must remain minimal.

Display and DMD Compatibility

P-ROC remains deeply connected to the architectures of its era and supports traditional monochrome DMDs. The board can directly transmit the data required to operate them, allowing a project to retain the display already installed in a compatible WPC or Stern machine. This capability is particularly valuable for rethemes and recodes because a creator can completely rebuild the software without replacing the DMD with an LCD or substantially modifying the backbox. P-ROC can also work with alphanumeric displays or be paired with various modernized solutions depending on the project. This compatibility directly illustrates its original purpose: replacing the intelligence of a pinball machine while preserving as much of its physical infrastructure as possible.

PDB Boards and Custom Machines

P-ROC is not limited to replacing existing CPUs. Multimorphic also developed complementary boards that allow a more customized architecture to be built around the controller. The PDB family notably adds capabilities for drivers, matrices, and lighting, making P-ROC usable in projects much closer to true homebrew machines built from components selected by their creators. This expansion represents an important stage in the evolution of the system: P-ROC begins to move beyond its role as an interface for WPC or Stern machines and progressively becomes an open infrastructure capable of supporting different forms of development.

Deliberately Open Software

Multimorphic did not build P-ROC around a mandatory game engine. The platform exposes its hardware to the computer while allowing developers to choose their own software environment. This openness quickly encouraged the development of community tools, including pyprocgame, one of the first major environments for developing P-ROC pinball software in Python. Creators could therefore concentrate a much greater share of their work on rules, modes, and gameplay rather than directly rebuilding the entire hardware communication layer. This open philosophy contributed substantially to P-ROC’s influence beyond the capabilities of the electronic board itself.

Its Role in the Birth of Mission Pinball Framework

The ecosystem developed around P-ROC also played an important role in the history of Mission Pinball Framework. MPF emerged in the early 2010s in a context where developers were seeking to make pinball programming more accessible and less dependent on a specific hardware platform. P-ROC provided an environment particularly well suited to this approach because it already clearly separated high-level software from the physical control of the machine. Mission Pinball Framework would later extend this philosophy to other electronic systems, but P-ROC remains directly associated with the emergence of this generation of development tools. Its influence therefore extends beyond machines physically equipped with the board.

Watchdog and Hardware Safety

An architecture in which a general-purpose computer controls powerful coils also requires protections independent of the software. P-ROC incorporates a hardware watchdog responsible for monitoring communication. If the computer stops responding normally, the system can prevent a driver from remaining activated indefinitely. This protection is essential for coils, which can quickly overheat or suffer damage when energized for too long. The watchdog illustrates the separation of responsibilities at the core of P-ROC: software can operate within a general-purpose computing environment and manage complex logic, while essential physical protections remain directly handled by the hardware.

An Evolving Architecture

P-ROC also relies on upgradeable firmware and a programmable FPGA, allowing certain functions to evolve without systematically requiring replacement of the board. This capability is particularly important for a platform intended for independent developers, whose requirements can change rapidly with the arrival of new frameworks, peripherals, or development methods. The ability to evolve the controller therefore helps extend its service life and allows it to support projects more ambitious than those originally envisioned when the system was launched.

A Major Breakthrough in 2009

The historical significance of P-ROC becomes fully apparent when its 2009 launch is placed in context. The pinball market was considerably more closed, electronic solutions available to independent developers were rare, and the inexpensive compact computers that would become common during the following decade were not yet commercially available. Using a general-purpose computer to completely reprogram a physical pinball machine was therefore a particularly advanced approach. P-ROC made this concept far more accessible by allowing developers to retain the physical machine while replacing almost all of its software intelligence. The pinball machine became a genuine programmable platform, bringing traditional pinball electronics and modern software development methods closer together.

The Limits of a Legacy-Based Architecture

P-ROC’s greatest strength also becomes its primary limitation. The system remains deeply shaped by its compatibility with legacy architectures. Its interfaces, matrices, and display capabilities must reproduce the behaviors expected by WPC, Whitestar, or SAM systems. This versatility is extremely useful for recodes and rethemes but becomes less relevant when a manufacturer wants to develop a completely new machine without inheriting those electronic constraints. Multimorphic therefore developed P3-ROC, a new generation designed directly for building new pinball machines. The difference between the two systems is not simply an increase in processing power. It represents a change in perspective: P-ROC starts with an existing machine and gives it new intelligence, while P3-ROC allows the electronics of a new machine to be built around a distributed architecture.

The Legacy of P-ROC

P-ROC remains a foundational platform in the history of independent pinball. It demonstrated that a machine’s software could be separated from its original electronic architecture and that game logic could be entrusted to a modern computer. This approach profoundly changed how developers could think about pinball: hardware and software no longer necessarily had to be designed together by a single manufacturer. The system opened the way for recodes, rethemes, independent frameworks, and a generation of developers capable of using pinball as a genuine programmable interactive platform.

Within the Pinball Xperience classification, P-ROC | Multimorphic | since 2009 therefore represents one of the foundational architectures of modern independent pinball. Its historical purpose remains primarily associated with transforming and recoding existing machines, while P3-ROC would extend this philosophy by adapting it directly to the design of new pinball machines. P-ROC therefore stands as the system that permanently separated the software intelligence of pinball from the legacy electronics on which it was originally built.

Machines on this system

1 machines