Pinball Xperience
Pinheck

Pinheck

PinHeck est la première architecture électronique développée pour accompagner la naissance commerciale de Spooky Pinball. Introduite avec America’s Most Haunted en 2014, elle concentre sur un nombre réduit de cartes la logique du jeu, les switches, les drivers de puissance, les mécanismes, l’éclairage et l’environnement audiovisuel. Son architecture embarquée repose notamment sur un microcontrôleur PIC32 pour le fonctionnement du jeu et un processeur Parallax Propeller dédié à l’audio et à la vidéo, sans recourir à un ordinateur généraliste. PinHeck is the first electronic architecture developed to support the commercial emergence of Spooky Pinball. Introduced with America’s Most Haunted in 2014, it concentrates game logic, switches, power drivers, mechanisms, lighting, and the audiovisual environment across a limited number of boards. Its embedded architecture notably relies on a PIC32 microcontroller to run the game and a Parallax Propeller processor dedicated to audio and video, without requiring a general-purpose computer. Designed to make low-volume commercial production viable, PinHeck later evolved into PinHeck 2 with Rob Zombie’s Spookshow International in 2016 and the adoption of a color LCD display. Within the Pinball Xperience classification, these two versions form Spooky Pinball’s first major electronic generation, the architecture that enabled the manufacturer to transition from homebrew experimentation to genuine commercial production before its adoption of P3-ROC.

PinHeck | Spooky Pinball’s First Electronic System

PinHeck represents the true starting point of Spooky Pinball’s electronic history. Before P3-ROC, Pinotaur, and The Warden, the young manufacturer needed a solution capable of transforming an approach still closely rooted in homebrew into genuine commercial production. The challenge was not simply to operate a few coils and switches, but to design an architecture complete enough to control an entire machine while remaining compatible with the economic constraints of a small company. This first platform appeared with America’s Most Haunted, produced in 2014 in a run of only 150 units. The machine became the first true commercial demonstration of PinHeck and allowed Spooky to prove that an electronic system developed on a small scale could support a complete production machine, operate the playfield, manage audiovisual content, and continue receiving software updates after release.

An Architecture Born from Homebrew

The development of PinHeck is closely associated with the work of Ben Heckendorn and Parker Dillmann. Ben Heck already had substantial experience creating custom pinball machines and contributed to the design, code, and overall environment of the project, while Parker Dillmann worked directly on the electronics, manufacturing, and industrialization of the boardset. This collaboration marked a major step forward. Previous personal projects had demonstrated that it was possible to build a complete pinball machine outside the major manufacturers, but PinHeck had to go much further. The system needed to be sufficiently reliable, reproducible, and straightforward to manufacture for a commercial production run, even one limited to only a few hundred units. This constraint directly shaped its philosophy. Rather than reproducing the highly modular architectures of the established manufacturers, PinHeck favored strong integration to reduce the number of different boards, limit internal connections, and simplify production.

A Large Multifunction Board

The central principle of PinHeck is a main board capable of concentrating a large share of the essential functions of the pinball machine. The boardset handles game logic, the switch matrix and direct cabinet inputs, coil and mechanism control, lighting, and audio and video functions. Audiovisual resources are stored separately. Power remains separate, but the machine’s intelligence is concentrated across a very small number of boards. For a small manufacturer, this organization offers a major advantage: fewer parts to manufacture, fewer connectors, less inventory, and a simpler maintenance structure.

The PIC32 as the Logical Core

PinHeck’s main processor is a Microchip PIC32MX795F512L, a 32-bit microcontroller running at 80 MHz with 512 KB of program space. It executes the main game code and handles most time-sensitive operations. The choice of this component corresponds directly to the PinHeck philosophy: rather than incorporating a complete PC, the system uses a processor powerful enough to run the rules, monitor playfield events, and control mechanisms with minimal latency. The PIC32 notably handles switch state changes, game logic, scoring, and the various commands required to operate the machine. This approach maintains relatively deterministic behavior without depending on the workload variations of a general-purpose operating system.

The Parallax Propeller for Audiovisual Processing

To preserve the performance of the main processor, PinHeck assigns audio and video processing to a second component, a Parallax Propeller running at 104 MHz. This separation allows the PIC32 to remain focused on gameplay while the Propeller processes visual and audio content. The two processors communicate notably through SPI, allowing the PIC32 to send high-level instructions to the audiovisual system, such as triggering a sound or displaying a sequence, without continuously generating the data required for graphics and audio itself. This organization is particularly appropriate for pinball: physical functions require constant responsiveness, while audio and video can demand heavier continuous processing. By separating these two categories of tasks, PinHeck prevents audiovisual workloads from directly affecting the response of a flipper, slingshot, or other mechanism.

An Embedded Architecture Without a General-Purpose PC

This design strongly distinguishes PinHeck from platforms that appeared later. P3-ROC or FAST Modern Platform generally rely on a host computer running most of the software, while a specialized controller manages communication with the playfield. PinHeck follows a much more integrated approach: the game intelligence remains directly embedded on the main board, without requiring a true general-purpose computer inside the backbox. This simplicity reduces cost, power consumption, and component count while limiting certain issues associated with storage, boot processes, or maintaining a complete PC. The available resources are more restricted, however. Software must be developed around the capabilities of the microcontroller and audiovisual processor, resulting in an architecture closer to sophisticated embedded firmware than to a contemporary computing environment.

An 8 × 8 Switch Matrix

Switch management remains directly inspired by traditional pinball architectures. PinHeck uses an 8 × 8 matrix capable of handling up to 64 positions for playfield sensors. This organization makes it possible to control a substantial number of switches with relatively few conductors, with each contact corresponding to the intersection of a row and column. The matrix is complemented by 16 inputs dedicated to cabinet functions. Flipper buttons, the Start button, door switches, and coin mechanism interfaces can therefore be handled separately from the main playfield network. This distinction provides a particularly appropriate compromise for the period: retaining the simplicity and efficiency of a traditional matrix while separating essential cabinet controls.

Coil and Mechanism Control

PinHeck also handles coils and their drivers, further increasing the platform’s level of integration. Flippers, slingshots, bumpers, kickers, and other electromechanical mechanisms are controlled directly by the central architecture. This approach avoids multiplying large specialized boards and allows the manufacturer to combine logic and power within the same environment while retaining a structure compact enough for low-volume production. The system must nevertheless manage electrical requirements very different from those of the main processor. Logic circuits operate at low voltage, while coils require significantly higher voltages and currents. PinHeck therefore combines relatively sophisticated control electronics with power stages capable of driving the playfield’s mechanical devices.

Lighting as Part of the System

America’s Most Haunted already uses a relatively ambitious lighting environment for an independent machine released in 2014. PinHeck therefore has to manage not only the inserts required by the rules but also various effects intended to reinforce atmosphere and staging. The lighting remains less sophisticated than the addressable RGB systems that would later appear with Pinotaur, but it already forms a genuine layer of gameplay. Light can accompany different game states, direct attention toward a particular area, or reinforce a thematic sequence. This direction anticipates a tendency that would become increasingly important at Spooky: using lighting, sound, and mechanisms as complementary components of a unified environment.

DMD, Audio, and SD Card Storage

The first PinHeck generation used by America’s Most Haunted operates with a DMD, while audio and visual content are managed by the dedicated processor. The system clearly separates the main game code from audiovisual resources. The primary firmware is installed separately, while the data required for the DMD and sound effects can be stored on an SD card. This organization provides an effective solution to the platform’s memory limitations: the microcontroller does not need to store every resource within its own program space, while the SD card provides the storage required for sounds and visual data. PinHeck therefore combines two technological approaches, with embedded firmware handling rules and physical control while external storage accommodates larger content assets.

An Architecture Capable of Evolving After Release

America’s Most Haunted received several software updates after its commercial release, demonstrating that PinHeck was not an architecture frozen at the time of manufacture. The main code could be updated while content stored on the SD card could also evolve. The manufacturer therefore retained the ability to fix bugs, modify rules, or expand certain content without replacing the hardware. This capability became increasingly important in modern pinball as the software lifecycle of machines gradually extended. PinHeck participated in this transition by allowing an independently produced machine to continue evolving after reaching the market.

PinHeck 2 and the Transition to LCD

The arrival of Rob Zombie’s Spookshow International in 2016 marked the evolution toward PinHeck 2. The platform retained the fundamental foundations of the first generation while adapting to a more modern audiovisual environment. The most visible change was the transition to a color LCD display, eliminating the constraints of the traditional DMD. The manufacturer could now display richer graphical interfaces, color animations, and more elaborate thematic content. This evolution represented an important step for Spooky: the backbox could assume a much greater role in presenting the license while the electronics retained a relatively compact architecture. PinHeck 2 did not, however, represent a conceptual break comparable to the later transition to P3-ROC. It was instead a direct evolution of the same technological family, adapted to new audiovisual requirements.

A Reusable Platform

PinHeck was not limited to America’s Most Haunted and Rob Zombie. The system was also used on other productions such as Domino’s Spectacular Pinball Adventure, confirming its ability to function as a genuine platform. This reuse is essential from an industrial perspective: an electronic architecture becomes significantly more viable when it can support several titles without requiring development to restart from scratch. Spooky could therefore change the theme, layout, and software while retaining an electronic foundation that was already understood and tested. This continuity directly contributed to the manufacturer’s growing expertise and prepared the transition toward more ambitious machines.

An Architecture Designed for Low Production Volumes

One of PinHeck’s principal strengths was its suitability for Spooky’s production volumes. The manufacturer was not yet attempting to build several thousand identical machines. PinHeck instead needed to remain economically viable across runs of only a few hundred units. Concentrating functions on a large board directly addressed this constraint. Fewer hardware references meant lower development costs, reduced inventory, fewer connectors, and simpler logistics. Maintenance could also be organized around a limited number of primary components. This philosophy explains why PinHeck occupies such an important place in the manufacturer’s history. It was not merely a system capable of operating a machine, but an architecture designed to make commercial pinball production economically achievable for a small company.

The Transition to P3-ROC

The increasing complexity of Spooky’s machines ultimately led the manufacturer to adopt P3-ROC for Total Nuclear Annihilation, Alice Cooper’s Nightmare Castle, and Rick and Morty. This transition represented a major change in philosophy. P3-ROC relies on a host computer and several specialized boards distributed throughout the machine. Game intelligence partially moved away from PinHeck’s highly embedded approach toward a more modern computer-based architecture. Spooky therefore experimented with a much more modular solution capable of supporting numerous peripherals and adapting to increasingly complex machines. This period did not erase PinHeck’s legacy. With Pinotaur, the manufacturer would later return to a highly integrated architecture, but one that had been thoroughly modernized.

The Legacy of PinHeck

PinHeck remains fundamental to Spooky’s history because it represents the first proof that the manufacturer could commercially produce a pinball machine using an architecture adapted to its own constraints. America’s Most Haunted demonstrated that the system could support an actual production run, Rob Zombie proved that it could evolve toward a color LCD, and subsequent productions confirmed its ability to be reused. The system therefore became the manufacturer’s first genuine industrial foundation, enabling the transition from an enthusiast project to a machine that could be produced, delivered, and commercially supported.

Spooky’s technological chronology can subsequently be understood as a succession of experiments built upon this first experience. P3-ROC favors distribution, Pinotaur returns to strong integration, and The Warden transforms this maturation into an architecture developed directly around the manufacturer’s requirements. Within the Pinball Xperience classification, the generation can be divided into PinHeck 1, introduced with America’s Most Haunted in 2014, and PinHeck 2, introduced with Rob Zombie’s Spookshow International in 2016. Both versions belong to the same technological lineage and together form Spooky Pinball’s first major electronic generation. PinHeck therefore represents the architecture that enabled Spooky to make the essential transition from homebrew experimentation to genuine commercial manufacturing.

Machines on this system

1 machines