Pinball Xperience
Spike 2

Spike 2

SPIKE is the first generation of the modern electronic architecture developed by Stern Pinball. It introduces a distributed design intended to simplify the machines’ electronics and wiring.

SPIKE | Stern Pinball’s First-Generation Electronic System

Officially introduced by Stern Pinball in January 2015 at CES in Las Vegas, the SPIKE system, now commonly referred to as SPIKE 1 to distinguish it from its successor, represents a major break in the manufacturer’s electronic history. WWE WrestleMania, released in 2015, was the first production Stern pinball machine to use this new platform. Stern presented SPIKE as a modern, modular, and scalable architecture specifically designed to withstand the mechanical and electrical demands of a pinball machine.

SPIKE abandons the far more centralized electronic organization of previous generations in favor of a distributed-processing architecture. The principle is to position the electronics closer to the components they control. A main CPU board communicates with multiple intelligent boards, known as Node Boards, distributed throughout the backbox, cabinet, and beneath the playfield. This organization reduces the number and length of wiring harnesses while making the architecture more modular. From its introduction, Stern emphasized three major objectives: reducing manufacturing complexity, improving reliability, and simplifying maintenance.

CPU Node 0 and Distributed Processing

At the top of this architecture is the CPU Node, or Node 0. It contains the game software, executes the main game logic, and also controls the display and audio. It communicates with the other nodes through the SPIKE Node Bus, an industrial network designed specifically for the pinball environment. Unlike an architecture in which every switch, lamp, or coil must be individually wired back to the main boards in the backbox, the Node Boards locally handle a significant portion of the machine’s input and output operations.

This organization fundamentally changes the way electronics are distributed throughout the machine. The CPU retains overall supervision of the system, while functions directly related to physical components can be located closer to the playfield or cabinet. SPIKE therefore no longer relies on concentrating as much electronics as possible in the backbox, but on a network of specialized components capable of working together.

Cabinet Node, 48V Playfield Nodes and Light and Switch Nodes

Several categories of nodes perform different functions. The Cabinet Node, or Node 1, notably manages equipment associated with the cabinet, coin door, and tilt system. The 48V Playfield Nodes control high-power playfield components, including coils and certain flashers, while also being capable of handling additional inputs and outputs. Light and Switch Nodes are primarily dedicated to switches and low-power LEDs. Expansion boards can further increase the number of available inputs and outputs to meet the specific requirements of a particular machine.

This distribution allows Stern to adapt the electronic infrastructure to the complexity of each game without rebuilding the entire system. A machine requiring additional resources can receive the appropriate nodes or expansion boards, while common functions continue to be handled by standardized components. Modularity therefore becomes one of the fundamental principles of SPIKE.

Intelligent Node Boards

Each node contains its own electronics and embedded processor. These are not simply passive boards remotely controlled by the CPU. The nodes execute their own code and communicate with the main system. When a software update is installed on the CPU, it can also automatically program the Node Boards. When a node is replaced, the system can detect it and update its software without requiring additional manual programming.

The different nodes also have addresses that allow the system to identify them. Address 0 is reserved for the CPU and address 1 for the Cabinet Node. Other boards can use different addresses, configured notably through DIP switches depending on the Node Board model. This organization allows Stern to use certain common electronic boards across multiple machines while assigning them different functions according to their location and the game configuration.

The SPIKE Node Bus

Communication between the boards uses RJ45 connectors and Category 5 UTP cabling, which can visually resemble a conventional Ethernet network. The two must not be confused. Stern explicitly states that the SPIKE Node Bus is not compatible with conventional Ethernet networking equipment and that connecting it to a standard computer network port can damage the boards.

The use of this cabling contributes to the architecture’s broader simplification strategy. Rather than routing numerous individual wiring harnesses between the backbox and different areas of the machine, SPIKE allows its nodes to communicate through a common bus. Information can therefore travel between the CPU and the distributed boards while electrical connections for switches, lighting, and mechanisms remain concentrated around the areas where they are actually required.

A 48V Architecture

Power distribution is another fundamental characteristic of SPIKE. The system primarily relies on a 48V DC switching power supply. The Node Boards then convert this voltage to the levels required by the components they control. High-power devices, including certain coils, receive 48V directly and are activated through their dedicated driver circuits. Stern’s SPIKE documentation notably specifies a 48V, 10.5A, 500W main power supply for the documented architecture.

This design also incorporates various forms of electronic protection. SPIKE outputs include protection against short circuits, overcurrent conditions, and electrostatic discharge. When a component develops certain faults, the system can disable the affected output rather than causing the entire platform to shut down. Integrated diagnostic tools can then help technicians identify the faulty component more efficiently.

LEDs at the Core of the Lighting System

Lighting directly benefits from this architecture. SPIKE is designed around LED technology, allowing Stern to develop more complex lighting effects while reducing power consumption, heat generation, and the maintenance associated with traditional incandescent lamps. The Node Boards can individually control different lights, groups of LEDs, General Illumination, and flashers.

Stern also presented the system’s fast response as a way to improve synchronization between gameplay, lighting, audio, and mechanical events. Lighting consequently becomes more closely connected to the current state of the game and can accompany physical actions within the machine with greater responsiveness.

A New Approach to Maintenance

SPIKE also transforms machine maintenance. Reducing the amount of wiring running across the playfield improves access to mechanisms, while the modular architecture makes it possible to replace a local board rather than systematically working on a large central board. Distributing functions across several nodes also helps identify the relevant electronic area when a problem occurs.

Stern developed a suite of software diagnostics around the system, allowing switches, coils, lamps, and flashers to be tested individually while also monitoring the status of the Node Boards and the Node Bus. Distributed electronics are therefore not designed solely around manufacturing or machine operation. They are accompanied by a diagnostic architecture intended to simplify technical servicing.

Standardization and Interchangeability

The platform also introduces an important standardization strategy for Stern. The same Node Board reference can be used across multiple different machines. For the manufacturer, this approach simplifies design, production, and component management. For operators and technicians, it provides familiar architectures and common parts from one machine to another.

Stern explicitly emphasized this interchangeability and the ability to reuse components that had already demonstrated their reliability in previous productions. The platform can therefore evolve without requiring an entirely new electronic system to be created for every title. This continuity would become one of the major strengths of the SPIKE philosophy throughout subsequent generations.

A Platform Designed to Evolve Stern Pinball

Beyond the electronics themselves, SPIKE was designed from the outset to allow designers to integrate more advanced technologies and mechanisms. When the platform was announced in 2015, George Gomez, then Executive Vice President of Product Development at Stern, explained that its modularity was intended to allow designers to adopt new technologies while improving reliability, serviceability, and efficiency. Stern also associated SPIKE with improvements in audio, lighting effects, and the overall gameplay experience.

The philosophy therefore extends beyond simply modernizing electronic boards. SPIKE is intended to provide an infrastructure flexible enough to support the evolution of Stern machines without requiring a complete architectural redesign for every new generation of mechanisms, lighting systems, or content.

WWE WrestleMania, the First Commercial Application

WWE WrestleMania became the first commercial proving ground for this new electronic generation. The machine introduced SPIKE in 2015 and allowed Stern to validate in production an architecture radically different from its previous generations. The system would subsequently be used on later releases before evolving into SPIKE 2, which retained the fundamental principle of distributed processing while significantly increasing multimedia capabilities and available computing power.

The transition from SPIKE to SPIKE 2 therefore did not abandon the philosophy developed in 2015. It expanded it. The principle of a central CPU working with distributed intelligent nodes remained at the heart of the next generation, while advances in computing hardware allowed Stern to add a far more ambitious audiovisual and software layer.

The Foundation of Stern’s Modern Architecture

SPIKE 1 occupies a pivotal position in Stern Pinball’s history. More than a simple replacement for previous electronic boards, it introduced the technical philosophy that structures the manufacturer’s modern machines: a central CPU, distributed intelligent nodes, 48V power architecture, Node Bus communication, standardized components, software diagnostics, and a modular, scalable design.

SPIKE 2 would extend and develop this architecture, but SPIKE 1 was where Stern made one of the major technological transformations of its modern history in 2015. The platform did not merely replace the previous electronic generation. It established the principles upon which Stern would build nearly a decade of subsequent technological evolution.

Machines on this system

11 machines