Pinball Xperience

Jim Henson's Labyrinth

Barrels of Fun · 2023

Description

Jim Henson's Labyrinth Pinball

Jim Henson’s Labyrinth launched the commercial catalog of Barrels of Fun LLC in 2023. Officially unveiled in October, ahead of the Chicago Pinball Expo, the machine immediately established several characteristics the manufacturer would later carry forward into Dune and Winchester Mystery House: a single commercial edition, a high density of dedicated mechanisms, extensive integration between mechanics and scenery, and a display system split between the backbox and the area directly beneath the playfield glass.

The game is officially licensed from the 1986 film Labyrinth. David Bowie, as Jareth the Goblin King, occupies a central position in the machine’s audiovisual presentation, while locations, characters, and creatures from the film are distributed throughout the playfield, sculpts, mechanisms, animations, and sound design. Rather than recreating a single scene, the overall architecture organizes the playfield as a succession of environments and encounters inspired by Sarah’s journey through the Labyrinth.

Barrels of Fun chose from its very first production not to divide the title into multiple trim levels. Labyrinth therefore exists neither as a Standard nor Premium model, nor as a separate Limited Edition. The announced production run covers a maximum of 1,100 machines, numbered from 1 through 1,100, with production extending across several years and continuing even after the arrival of later titles from the manufacturer.

Each machine receives its own identification within Barrels of Fun’s Relic system. This identification is assigned after assembly and quality control and links each individual machine to its production number.

Hardware Architecture

Labyrinth is built on the FAST Pinball Modern platform, which manages switches, coils, servos, lighting, expansion boards, and other interactive peripherals. An onboard computer housed in the backbox runs the primary software, animations, audio content, operator menus, and coordination between the machine’s various hardware subsystems.

The electronic architecture is distributed across several specialized boards. Technical documentation identifies a Cabinet I/O Board 0024, along with multiple FAST modules responsible for coils, inputs, lighting, and expansion functions. The system can detect the presence of these boards, display certain firmware information, and report several categories of errors through its diagnostic menus.

The machine supports up to four players and can operate in either Free Play or coin-operated mode. The coin door provides access to service controls, volume settings, operator menus, and credit parameters required for both home and commercial operation.

Playfield and Mechanical Architecture

The playfield uses three flippers and operates with five balls. Two main flippers occupy the lower section of the playfield, while a third is positioned higher up to serve specific trajectories and attack targets in the upper areas of the layout.

Ball flow relies on a combination of ramps, wireforms, subways, scoops, diverters, smart drop targets, up-posts, and magnets. Several of these components physically change position or alter the ball’s trajectory under software control, allowing certain routes through the playfield to evolve during the course of a single game.

This design directly reflects the theme. The Labyrinth is not represented solely through graphics. It is translated into a network of opening and closing paths, intelligent targets, hidden areas, and mechanisms capable of capturing or redirecting the ball.

Goblin City Magnet Diverter

The Goblin City area uses a diverter mechanism combined with a magnet. The device influences several trajectories in the upper section of the playfield and allows the software to alter the direction or destination of a ball according to the current game state.

Its function extends beyond simply creating shot variation. The mechanism contributes to the physical representation of the Labyrinth by allowing the same area to perform different functions depending on progression and the active sequence.

Goblin Gate Fork Trap

The Goblin Gate Fork Trap is a ball-holding mechanism capable of physically capturing a ball. It operates as an obstacle, trap, and locking device during different sequences. The presence of the ball is monitored by switches associated with the mechanism. The software can therefore control when the ball is released and determine whether the trap is loaded or available for another capture.

Humongous Smart Drop Target

The Humongous Smart Drop Target combines a sculpt of the character with a motorized drop target. Unlike a conventional drop target, its position can be controlled by software and incorporated into different game states. The mechanism can therefore be raised, lowered, or used as a progression objective depending on the active sequence. This interaction between sculpture and mechanical target represents one of the earliest examples of the design language developed by Barrels of Fun.

Goblin Gate Spinner

The Goblin Gate Spinner is positioned in the area leading toward Goblin City. Its rotations are counted by the software and can contribute to several objectives or sequences. The spinner uses a conventional mechanical architecture, but its placement and graphic treatment integrate it directly into the sculpted environment of the upper playfield.

Brick Keeper Lift Ramp

The Brick Keeper area uses a motorized lift ramp capable of changing position under software control. The movement of the ramp physically opens or closes access to an area beneath its structure. This mechanism directly transforms the geography of the playfield. The ramp therefore serves not only as a ball path, but also as a moving gateway providing access to another section of the playfield.

Brick Keeper Hidden Home

Beneath the lift ramp is a hidden scoop representing the Brick Keeper’s home. The ball can reach this area only when the ramp is positioned to expose the entrance. The combination of a moving ramp and concealed scoop gives the area multiple operating states. The same section of the playfield can therefore function either as a ramp or as the entrance to a hidden mechanism.

Beggar Magnet

The Beggar Magnet is located in the central area of the playfield. It can directly alter the position or trajectory of a ball and uses a dedicated magnetic coil. This mechanism is involved in several sequences and constitutes one of the game’s two main magnetic control zones. Its behavior is software-controlled and can vary according to the current game state.

Orbit Magnet

A second magnet is positioned in the upper section of the playfield, around the orbit. It can momentarily hold or deflect a ball in this area before returning it to normal play. Labyrinth therefore features two primary gameplay magnets. Their use focuses more on trajectory control and mechanical staging than on simply introducing random ball behavior.

Bog Scoop

The Bog Scoop is a physical capture area associated with the Bog of Eternal Stench. The ball can be held there before being returned to the playfield according to the requirements of the active sequence. This area contributes to the game’s underground ball routing and complements the various entrances, exits, and hidden passages used to represent locations from the film.

Helping Hands Scoop

The Helping Hands Scoop provides another physical capture point. It is integrated into a sculpted area representing the Helping Hands and participates in several progression states. The scoop therefore combines mechanical function with thematic representation. The ball does not simply enter a functional opening, it enters a recognizable location from the film’s universe.

Sir Didymus Staff Up-Post

The Sir Didymus area uses a controlled up-post capable of rising into the ball’s path. Its activation can temporarily block a passage or protect a drain area. The software can adjust both the duration and context of its activation. The device can therefore function as a physical save, temporary obstacle, or ball-control element.

Ello Worm

The Ello Worm character is integrated into an interactive mechanism associated with a specific lane. The sculpt can appear or directly interact with the area when certain conditions are met. This combination of character, mechanism, and ball flow illustrates the way Barrels of Fun transforms narrative elements from the film into active playfield components.

Knockers

The Knockers are represented by a sculpted door structure inspired by one of the film’s most recognizable passages. This area combines mechanical interactions with dedicated audio sequences. The software can also support an additional physical knocker when installed, although this component was not part of the original factory configuration.

Wise Man Smart Drop Target

The Wise Man area uses a second Smart Drop Target. Its operation relies on a motorized target whose position is controlled by software. The mechanism serves as an interaction point for sequences associated with the character and extends the concept introduced by the Humongous Smart Drop Target.

Physical Ball Path Diverter

A mechanical diverter can open or close specific playfield paths. Its movement directly changes the ball’s destination. This type of mechanism contributes to the changing nature of the layout by allowing the software to modify ball flow without requiring additional input from the player.

Flippers

The machine features three flippers. The two main flippers use coil assemblies that separate initial power from holding power. Documented coils include components from the COL-1629-01 family. The FAST platform allows certain power and recovery parameters to be adjusted through software. Several updates have also improved flipper management following specific gameplay phases or knockdown situations.

Auto-Launch and Trough

Labyrinth features an auto-launch system capable of automatically firing a ball from the shooter lane whenever required by the software. The trough manages the machine’s five balls and incorporates its own ejection mechanism. Auto-launch is used during multiballs, ball saves, and sequences requiring immediate ball delivery without player input. It therefore complements the manual launch used at the beginning of a standard ball.

Slingshots

The playfield uses two primary slingshots as well as an upper-right slingshot. These mechanisms rapidly redistribute the ball through the lower and middle sections of the playfield. The upper-right slingshot can be disabled through certain software settings. This option alters the machine’s mechanical behavior and indirectly adjusts its difficulty.

Magnetism

Two primary magnets are integrated into the gameplay: the Beggar Magnet in the central area and the Orbit Magnet in the upper section. Both allow the software to exert temporary control over the ball.

Their use follows a mechanical staging philosophy. The trajectory can be suspended, redirected, or controlled before the ball is returned to the player.

Magnet

Location

Beggar Magnet

Central area

Orbit Magnet

Upper area / orbit

Sculpts and Three-Dimensional Construction

Labyrinth uses numerous sculpted elements distributed throughout the playfield. Several characters are directly associated with mechanisms, while others help construct the different environments of the Labyrinth.

Major elements include Humongous, Brick Keeper, Firey, Ello Worm, the Knockers, Wise Man, Sir Didymus, Helping Hands, Goblin City, Ludo, and various village environments. Several of these sculpts are motorized or serve as structural supports for targets, scoops, and other mechanisms.

From this first production onward, the approach establishes a defining characteristic of Barrels of Fun: three-dimensional decoration is not treated as an independent visual layer, but as an integral component of the game architecture.

Lighting

The playfield uses an LED lighting system controlled by the FAST platform. Inserts, General Illumination, and multiple dedicated effects are synchronized with modes, mechanisms, and animations across both displays.

The backbox speakers also feature variable-color lighting. Their illumination can be controlled through software and disabled from the operator settings.

Labyrinth does not feature the HAL system later introduced on Dune. Its lighting architecture therefore relies on GI, inserts, dedicated illuminated elements, and backlit speakers, without a separate peripheral atmospheric lighting layer.

Main Display

The backbox incorporates a 15.6-inch LCD display. It serves as the primary screen for scores, video, animations, progression information, and operator menus. The display is mounted between the two speakers within a metal speaker panel. Its exact industrial reference, panel technology, and native resolution have not been published in sufficient detail.

Backboard Display

A second 14.9-inch LCD display is installed directly on the backboard beneath the glass. Its position allows the player to access certain information without completely shifting attention away from the playfield.

This architecture establishes the dual-display concept that Barrels of Fun would subsequently retain. The first screen performs the traditional functions of a backbox display, while the second becomes a visual surface integrated directly into the gameplay space.

Display

Size

Function

Main LCD

15.6"

Scores, interface, animations

Backboard LCD

14.9"

Content integrated into the playfield

Audio

The machine uses a stereo audio system supplemented by a cabinet-mounted subwoofer. The documented subwoofer measures 8 inches, has an impedance of 4 ohms, and a rated power of 200 W.

The backbox speakers are positioned on either side of the main display and feature variable-color lighting. Software controls allow adjustment of both the overall audio level and the subwoofer level through the operator controls.

A major audio revision released in 2026 remastered the complete sound package. It also reorganized several mixing parameters and introduced new compression and balancing options.

Shaker Motor

A shaker motor was not part of the factory configuration when Labyrinth launched. The machine was originally designed and sold without this equipment.

Compatibility with the Thunder From Down Under Shaker Motor was later added through a software update. The shaker consequently became an officially supported accessory without altering the historical definition of the machine’s standard factory configuration.

Cabinet

The cabinet uses the industrial architecture developed by Barrels of Fun for its first generation of machines. It consists of a main wooden cabinet, folding backbox, four metal legs, side rails, and a lockdown bar.

The documented metal finish used on several components is called Ron Burgundy. Decorated inner blades are factory-installed and extend the cabinet artwork beneath the playfield glass.

The exterior artwork is distributed across both cabinet sides and the front panel. Its continuity with the inner blades helps construct the visual environment of the Labyrinth around the playfield.

Playfield Glass

The factory configuration of Labyrinth uses standard tempered glass. This represents the original specification of the 2023 model. Infinity Glass anti-reflective glass was later offered as a compatible accessory. It should therefore not be considered standard equipment on the model, unlike subsequent Barrels of Fun productions.

Backglass

The standard backglass depicts Jareth, with David Bowie occupying a central position in the composition. It forms part of the graphic package created specifically for the machine. An official alternate backglass is also available and can replace the original artwork. It remains a separate accessory rather than a distinct production variant of the machine.

Alternate Backglass

The official alternate backglass, titled Should You Need Us, uses a mirrored composition featuring several characters and creatures from the film. It was sold separately from the machine. When ordered alongside the pinball machine, the standard backglass remains the original factory specification, while the alternate is supplied as an additional component that the owner may install if desired.

Shooter Rod

An official Custom Nipper Shooter Rod is available as an accessory. It replaces the standard shooter handle with a sculpt representing Nipper. The accessory retains the functional architecture of the shooter while primarily altering its presentation. It forms part of the customization range developed around the model.

Topper

The Animated Goblin Topper is an optional official accessory composed of three sculpted goblin heads. Two of them can mechanically rotate during sequences programmed into the software.

The topper features its own callouts, RGB lighting effects, and illuminated eyes. The software recognizes it as a distinct peripheral and provides dedicated settings for volume, lighting, and behavior.

Several dozen dedicated scenes have been added through successive updates. The topper therefore operates as a genuine audiovisual extension of the machine rather than simply as a static decorative element.

Player Controls

The machine uses a front-mounted Start button, side flipper buttons, a manual plunger, and service controls accessible behind the coin door. The flipper buttons are presented as Crystal Ball Flipper Buttons, a distinctive visual signature of the model.

Their architecture uses leaf switches. The right button notably employs a dual-contact system allowing multiple levels of interaction, while the left button uses a more conventional configuration.

Tilt

The machine uses a mechanical plumb bob tilt installed inside the cabinet. Sensitivity is adjusted by changing the vertical position of the weight on its rod. The higher the weight is positioned, the more quickly the system responds to cabinet movement. Software then manages warnings and tilt conditions according to the operator configuration.

Machine Dimensions

When assembled, the machine measures approximately 73 cm wide, 139.7 cm deep, and 194.3 cm high. With the topper installed, maximum height reaches approximately 235 cm.

These measurements correspond to the machine installed and ready for play. Overall dimensions may vary slightly depending on leveler adjustment and the selected pitch.

Dimension

Imperial

Metric

Width

28.75"

73.0 cm

Depth

55"

139.7 cm

Height without topper

76.5"

194.3 cm

Height with topper

92.5"

235.0 cm

Shipping Dimensions

With the backbox folded, the machine itself measures approximately 28.75 × 52 × 30.5 inches. This configuration makes it easier to move through access points and temporarily store the machine before installation.

When packaged, the machine occupies approximately 32 × 32 × 62 inches, or 81.3 × 81.3 × 157.5 cm. When a topper is packed with the machine, total shipment height can reach approximately 72 inches, or 182.9 cm.

Weight

The documented shipping weight for Labyrinth is 340 lb, approximately 154.2 kg. This figure refers to the machine packaged for transportation. Several different commercial weight figures have circulated throughout the model’s lifespan, but the exact net weight of the assembled machine without packaging has not been published with the same level of precision.

Pitch

The recommended playfield pitch is approximately 7 degrees. Measurement should be taken directly from the playfield rather than from the glass. The initial setup calls for the front levelers to be fully retracted and the rear levelers substantially extended. The machine should also be leveled from side to side to maintain balanced ball movement across the playfield.

Electrical Power

The machine accepts a general input range of 100 to 240 VAC at frequencies between 50 and 60 Hz. The main fuse is specified at 8 A maximum and 250 VAC minimum.

The machine must be connected to a grounded outlet protected by a circuit rated no higher than 15 A. Machines intended for European and Australian markets also use configurations appropriate for their 240 V power supplies.

Region

Voltage

Frequency

North America

120 VAC

60 Hz

Europe

240 VAC

50 Hz

Australia

240 VAC

50 Hz

Electrical Safety and Coin Door

Opening the coin door activates a dedicated interlock switch. This disables certain high-power circuits during service operations.

This architecture reduces risk during maintenance procedures. It also allows the software to distinguish normal operation from an operator diagnostic condition.

Software and Updates

The Labyrinth software evolves through successive updates. The main package is named lab.fun and can be installed directly from the PC housed in the backbox. Installation can be performed using a USB drive, the preferred method for maintenance operations. The machine detects the package, begins installation, and automatically reboots after validation. Network support was added after launch, expanding connectivity and maintenance capabilities without altering the machine’s physical architecture.

Connectivity

The machine provides network functionality through Ethernet and Wi-Fi. Support for these features has been progressively expanded through software updates. Improvements have included better network detection and compatibility with different SSIDs. Network connectivity therefore supplements local update methods without completely replacing USB installation.

Software History

The first documented public release is 2023.10.14A, used around the machine’s launch at Pinball Expo 2023. It represents the first commercial software state of the title.

As of August 8, 2026, the latest documented public release is 2026.01.30. This branch notably introduces a major audio overhaul, shaker motor compatibility, new light shows, and several corrections related to mechanisms and stability.

Game Modes and System

The software has been expanded over time with several operating modes. The machine includes Solo Play, Multiplayer, Cooperative Mode, Challenge Mode, Tournament Mode, and Barrel Ball.

These modes alter the organization of the game, objectives, or interactions between players without changing the physical configuration of the playfield.

Diagnostics

The service menu includes several diagnostic tools dedicated to switches, coils, LEDs, servos, and FAST boards. These functions allow mechanical or electronic faults to be isolated quickly.

A switch history, system information, and various specialized tests complement these tools. The software therefore serves as a comprehensive technical interface for machine maintenance.

Ball Search

The ball search system can sequentially activate multiple mechanisms to free a trapped ball. Scoops, the lift ramp, certain locks, and various moving areas can be triggered automatically.

After several unsuccessful cycles, the software can also initiate lost-ball compensation. This prevents a game from remaining indefinitely stalled because of an undetected ball.

Maintenance

Routine maintenance includes inspecting the balls and cleaning the playfield, decorative elements, and glass. Moving mechanical areas should also be visually inspected for friction, loose hardware, or dust accumulation.

Balls should be cleaned before their initial installation to remove any manufacturing oil residue. Any ball showing corrosion or surface damage should be replaced to protect the playfield clearcoat.

The machine should be kept in a stable indoor environment, protected from humidity, extreme temperatures, and prolonged direct sunlight. These conditions help preserve the electronics, artwork, and printed surfaces.

Included Contents

The documented package includes the machine, four legs, eight leg bolts, eight nylon washers, four felt cabinet protectors, five balls, a power cord, and a hex key used for securing the backbox. Replacement slingshot plastics and several small service components are also supplied with the machine.

The package also includes a commemorative keychain, a telescoping magnetic tool, a bottle opener, a polishing cloth, and two inner blade protectors. The topper, alternate backglass, Nipper shooter rod, Infinity Glass, and shaker motor belong to the accessory range and do not define the original factory configuration.

Official Accessories

The official range includes the Animated Goblin Topper, Should You Need Us Alternate Backglass, Custom Nipper Shooter Rod, Infinity Glass, and Thunder From Down Under Shaker Motor. These components expand the machine’s presentation or physical feedback without creating a separate commercial edition of the pinball machine.

Replacement parts, protectors, and Labyrinth-specific kits also complement the aftermarket range. Their availability contributes to the long-term maintenance and preservation of the machines.

Manufacturing

Jim Henson’s Labyrinth is assembled in Houston, Texas, at Barrels of Fun’s facilities. Its construction combines a wooden cabinet, FAST Pinball electronics, onboard computer, two LCD displays, an audio system with subwoofer, ramps, wireforms, scoops, magnets, smart drop targets, up-posts, diverters, servos, sculpts, and illuminated elements.

This first production establishes much of the manufacturer’s industrial philosophy. The machine is conceived as a complete system in which mechanics, scenery, lighting, displays, and software are developed together rather than as independent layers.

Production

The Labyrinth run is limited to a maximum of 1,100 units. Production extended across several years rather than being concentrated within a short launch window.

Documented milestones show 500 machines shipped by September 2024, 559 by October of the same year, and 750 by December. Units remained available in early 2026, confirming a more gradual production cadence than that of some of the manufacturer’s limited runs.

Data

Jim Henson’s Labyrinth

Manufacturer

Barrels of Fun LLC

Reveal

October 2023

Year

2023

Assembly

Houston, Texas, USA

Catalog position

First machine

Commercial editions

1

Maximum production

1,100

2026 status

Still available from inventory

Final production

Run capped at 1,100

Launch Price

The U.S. launch MSRP was $10,600 USD. This price corresponds to the model’s single commercial configuration.

Optional accessories, shipping, import costs, and taxes are not included in this amount. The European market does not have a single directly comparable MSRP because of differences in VAT, transportation, and distribution costs.

Warranty

The warranty covers eligible machine components for one year from the date of sale to the original purchaser. LCD displays are covered for six months.

Wear components, including certain plastics, rubbers, posts, and the playfield, are subject to separate conditions or excluded from the standard warranty. The machine must be registered within the required period after purchase to properly activate coverage.

Design Team

David Van Es is credited with the concept and game design of Labyrinth, while Travis Moseman handled engineering and mechanical development. Eric Priepke was responsible for software development, with Phil Grimaldi and Bowen Kerins contributing to rules development.

The visual identity brought together Jonathan Bergeron for artwork and Johnny Fraser-Allen for art direction. Trent Armstrong worked on animation, Marc Silk provided callouts, and Nate Hallinan created the original backglass.

Role

Credit

Concept

David Van Es

Game Design

David Van Es

Engineering / Mechanics

Travis Moseman

Software

Eric Priepke

Software / Rules Development

Phil Grimaldi

Rules

Bowen Kerins

Artwork

Jonathan Bergeron

Art Direction

Johnny Fraser-Allen

Animation

Trent Armstrong

Callouts

Marc Silk

Original Backglass

Nate Hallinan

PX Technical Summary

Specification

Jim Henson’s Labyrinth

Manufacturer

Barrels of Fun

Year

2023

Manufacturing

Houston, Texas, USA

Catalog position

First machine

Platform

FAST Pinball Modern

License

Jim Henson’s Labyrinth

Editions

1

Maximum production

1,100

U.S. MSRP

$10,600 USD

Players

Up to 4

Balls

5

Flippers

3

Main ramps

3

Lift Ramp

Yes

Subways

Yes

Scoops

Multiple

Magnets

2

Smart Drop Targets

2

Fork Trap

Yes

Diverters

Multiple

Up-post

Yes

Auto-launch

Yes

Manual plunger

Yes

Goblin City Magnet Diverter

Yes

Humongous Smart Drop Target

Yes

Brick Keeper Lift Ramp

Yes

Beggar Magnet

Yes

Orbit Magnet

Yes

Bog Scoop

Yes

Helping Hands Scoop

Yes

Sir Didymus Up-post

Yes

Ello Worm Mechanism

Yes

Wise Man Smart Drop Target

Yes

Main display

15.6" LCD

Backboard display

14.9" LCD

Subwoofer

8", 4 Ω, 200 W

Speaker lighting

Variable color

Factory shaker

No

Shaker compatibility

Yes

Factory glass

Standard tempered glass

Infinity Glass

Accessory

Inner blades

Factory-installed

Topper

Optional

Alternate Backglass

Optional

Alternate Shooter Rod

Optional

Cabinet finish

Ron Burgundy

Crystal Ball Flipper Buttons

Yes

Width

73.0 cm

Depth

139.7 cm

Height

194.3 cm

Height with topper

235 cm

Shipping weight

154.2 kg

Recommended pitch

Approx. 7°

Mains input

100–240 VAC

Frequency

50–60 Hz

Main fuse

8 A / 250 V

Recommended circuit

15 A max

Tilt

Mechanical plumb bob

Network

Ethernet / Wi-Fi

Updates

USB / network

Software package

lab.fun

Documented version

2026.01.30

Parts warranty

1 year

LCD warranty

6 months