Pinball Xperience

Rick and Morty

Spooky Pinball · 2020

Description

RICK AND MORTY | SPOOKY PINBALL | 2020

Scott Danesi began designing Rick and Morty for Spooky Pinball in late 2017. The machine was announced in late 2019, with production beginning in early 2020. Scott Danesi handled the playfield design, Eric Priepke the software, Bowen Kerins and Eric Priepke the rules, Josh Freydkis the artwork, David Van Es the animations, Scott Danesi and David Van Es the sound effects, and Scott Danesi the music using additional Adult Swim material. Justin Roiland recorded custom dialogue for the game. Chris Niezold and Jimmy Lipham are credited with the operating system. Spooky limited total production to 750 machines.

The Playfield | Danesi Lock, Flooble Crank and Anti-Gravity Field

The playfield features three flippers, two at the bottom and a third in the upper-right section, two ramps, one pop bumper, two drop targets, one captive ball, and one magnet. Scott Danesi replaced the traditional left slingshot with a pop bumper installed in the same area. The right side retains its slingshot. The two ramps provide the primary major shots, while the upper flipper is used to reach shots including the spinner loop and the Garage. A center scoop handles several ruleset functions.

The Danesi Lock 2.0 uses two drop targets positioned on either side of a horseshoe and a retractable post located behind them. The mechanism physically holds balls in the center area. The Flooble Crank is a captive ball with several functions, including advancing the locks and charging the magnetic system. The Anti-Gravity Field uses a magnet located near the right outlane and can be activated by the player when sufficient energy is available. The playfield also includes the Beth, Summer, and Jerry standup targets, the S-L-A-M lanes, the Meeseeks Box, and Rick’s spaceship.

The machine does not feature a separate upper playfield and is therefore classified as PX LEVEL™ CORE LEVEL™. Three flippers opening multiple shooting angles place it within PX LAYOUT™ FAN MULTI. Short trajectories around the horseshoe, the pop bumper positioned close to the lower flippers, direct returns, and the action of the magnet correspond to PX BALL KINETICS™ SNAP.

Adventures | Episodes Become the Main Modes

Adventures form the main campaign. Progress is represented on the Morty Adventure Card located above the flippers and on the LCD. At the beginning of a game, a ramp prepares the first Adventure. Subsequent Adventures normally require both ramps to be completed before the center scoop can start the mode. Pickle Rick uses the Garage as its starting point.

The Adventures include Total Rickall, The Whirly Dirly Conspiracy, Roy: A Life Well Lived, Look Who’s Purging Now, Anatomy Park, Get Schwifty, Raising Gazorpazorp, Scary Terry, Goodbye Moonmen, Pickle Rick, and The Blood Dome. Each mode has its own objectives and uses different combinations of ramps, loops, targets, the scoop, and the Garage.

The Beth, Summer, and Jerry standups form the Family system. Completing all three lights a Mystery award at the center scoop. The four S-L-A-M lanes control Slam Save, a system associated with the pop bumper positioned in place of the left slingshot. These rules operate alongside Adventures and the other active progression systems.

Dimensions, Megaseeds and Mr. Meeseeks | Rules Change During the Game

The Portal Gun allows the player to change dimensions. Its progression is advanced in part through the spinner, and the Garage allows dimensional travel once the system is ready. Each dimension applies a specific effect. Some multiply the values of ramps, the spinner, combos, lanes, Family Targets, the scoop, or one half of the playfield. Others temporarily disable a mechanism, alter flipper behavior, or change the audiovisual presentation.

Documented dimensions include 17-R4MP5 for ramp scoring, BW00-P for the spinner, CMB-0 for combos, H4-+ch for the scoop, and Hv3-LT and Hv3-RT for the two halves of the playfield, along with several dimensions that temporarily disable the spinner, Flooble Crank, Meeseeks Box, Family Targets, or slingshot. Others modify lighting, sounds, or music without directly changing scoring.

Megaseeds and Mr. Meeseeks provide two additional systems tied to the playfield shots. Megaseeds can be collected in different dimensions and contribute to the bonus. The Meeseeks Box assigns Meeseeks to different shots and their values. Adventures, dimensions, Megaseeds, Meeseeks, and combos can therefore operate across the same physical network of shots.

Multiballs, Code and Production

The Danesi Lock 2.0 and Flooble Crank are used to prepare Gromflomite Battle Multiball. The Crank advances the locks, after which balls are physically held inside the center horseshoe. During the multiball, several shots become jackpots and the Garage is involved in the progression toward the Super Jackpot. Meeseeks also has its own multiball progression through Meeseeks Mania. The machine includes additional multiball sequences integrated into the Adventures and other ruleset systems.

Spooky released Rick and Morty in Standard Edition and Blood Sucker Edition. Official total production was limited to 750 machines. The Blood Sucker Edition features additional equipment and finishes, including a specific powder-coat treatment, dedicated cabinet components, and a numbered plaque. Spooky also supplied an interactive topper associated with the Portal Gun. The entire production run was reserved very quickly after orders opened, with Spooky describing Rick and Morty as its fastest-selling title at the time.

Software development continued after the first machines were delivered. The latest identified build is 2023.03.22, dated March 22, 2023. Successive updates expanded and corrected rules, modes, and various machine behaviors. Rick and Morty remains listed by Spooky among its previous productions, with model-specific parts continuing to be available through its support network.

PX Technical Summary

Specification

Rick and Morty

Manufacturer

Spooky Pinball

Year

2020

Announcement

Late 2019

Production Start

Early 2020

License

Rick and Morty

Game / Playfield Design

Scott Danesi

Software

Eric Priepke

Rules Design

Bowen Kerins / Eric Priepke

Operating System

Chris Niezold / Jimmy Lipham

Artwork

Josh Freydkis

Animation

David Van Es

Music

Scott Danesi / Adult Swim

Sound Effects

Scott Danesi / David Van Es

Custom Voice Calls

Justin Roiland

Cabinet Format

Standard Body

Players

4

Display

LCD

Flippers

3

PX LAYOUT™

FAN MULTI

PX LEVEL™

CORE LEVEL™

PX BALL KINETICS™

SNAP

Ramps

2

Pop Bumpers

1

Drop Targets

2

Captive Balls

1

Magnets

1

Danesi Lock 2.0

Yes

Flooble Crank

Yes

Anti-Gravity Field

Yes

Garage

Yes

Center Scoop

Yes

Spinner Loop

Yes

Meeseeks Box

Yes

Family Targets

Beth / Summer / Jerry

S-L-A-M

Yes

Adventures

11

Dimensions

Multiple

Starting Dimension

C-137

Portal Gun

Yes

Megaseeds

Yes

Mr. Meeseeks

Yes

Morty Adventure Card

Yes

Gromflomite Battle Multiball

Yes

Meeseeks Mania

Yes

Standard Edition

Yes

Blood Sucker Edition

Yes

Total Production

750 machines

Interactive Topper

Yes

Latest Code

2023.03.22

Latest Code Date

March 22, 2023

Manufacturer Support

Active