Ultraman: Kaiju Rumble
Spooky Pinball · 2021
Description
ULTRAMAN: KAIJU RUMBLE | SPOOKY PINBALL | 2021
Ultraman: Kaiju Rumble adapts the Ultraman television series launched in Japan in 1966 by Tsuburaya Productions. The game features Ultraman, the Science Patrol, and several Kaiju from the original series, including Baltan, Bemular, Jirahs, Ragon, Gamora, Red King, and Zetton. Spooky Pinball introduced the machine in July 2021 alongside Halloween. Both titles use the same layout and mechanical foundation but feature their own rules, artwork, and audiovisual presentation. Engineering was handled by Lukas “Spooky Luke” Kastner, David Fawcett developed the initial code and contributed to the rules with Corwin “Bug” Emery, Matt Frank created the artwork, Matt Reister produced the sculptures, and Matt “Count D” Montgomery composed the original music. Later software and rules development also involved Matt Kemp and Luke Peters.
The Playfield | Three Levels for the Science Patrol and the Kaiju
The playfield features four flippers, four steel ramps, three upper playfields, seven physical ball locks, two inlane lifters, a central three-bank of drop targets, a Science Patrol Pin Drop Target Ball Lock, three interactive buildings dedicated to Baltan, a Beta Capsule scoop, a dual spinner loop, and more than 150 interactive RGB lights. The main level contains the primary shots, orbits, and central target bank. The right ramp sends the ball toward the intermediate playfield used for Bemular, while the center ramp provides access to the upper Science Patrol playfield. This area features a flipper, two spinners, a drop target, and a crossing ramp. The ball therefore moves regularly between the main playfield and two playable elevated areas before returning to the lower level.
The three buildings on the left side are used for Baltan’s Bash. The left ramp reveals Baltan behind one of them, after which the player must send a ball into each building to prepare the sequence. The intermediate playfield has its own target and a scoop used for Bemular Battle, while the upper level hosts part of the confrontation with Jirahs. The two inlane lifters return balls from the internal ball-routing system to the playfield. The Science Patrol drop target on the right can also physically hold a ball, which can later be used as an add-a-ball or protection depending on the current game state.
This configuration is classified as PX LAYOUT™ FAN MULTI and PX LEVEL™ MULTI LEVEL™. The primary shots from the lower flippers coexist with areas controlled by additional flippers and multiple elevation changes. PX BALL KINETICS™ is classified as MIXED due to the combination of fast orbits and ramps, physical captures, drop targets, lifters, and sequences played on the upper levels.
Pigmon Quick Battles, Baltan, Bemular and Jirahs | The Kaiju Structure the Progression
Pigmon Quick Battles form the main mode system. Access is gained through the central drop target bank followed by the Beta Capsule scoop, which displays the available battles. Six Quick Battles must be played for complete progression. They include Ragon, Gamora, and Red King, with each confrontation using its own shot sequences and different areas of the playfield. Modes can be combined with multiballs, and their progression is later required for access to the game’s advanced objectives.
Baltan’s Bash uses the three interactive buildings on the left. The player reveals Baltan by shooting the left ramp, then locks one ball behind each building. Once the sequence begins, the buildings become jackpot shots, and collecting the Super Jackpot completes the mode. Bemular Battle takes place around the intermediate playfield reached from the right ramp. The scoop in this area starts the battle, after which the required objectives lead into Bemular Multiball and its Super Jackpot.
Jirahs primarily uses the upper playfield. The spinners reduce its health meter while the player must avoid certain shots capable of damaging Ultraman. Once this phase is completed, the drop target and crossing ramp advance the battle before a multiball phase begins. The main ramps and orbits then become jackpot shots, while the crossing ramp awards the Super Jackpot. The dual spinner loop allows a single successful trajectory to pass through both spinners in succession.
Spacium operates as a separate resource. It can be collected through several objectives and then spent at the Beta Capsule for different rewards. Combos use four primary flow shots: left orbit, left ramp, center ramp, and right orbit. Once a shot has been used in the current chain, it temporarily becomes unavailable for the combo, requiring the player to move the ball between different shots instead of immediately repeating the same trajectory.
Zetton and Ultra Brothers | The Ruleset’s Advanced Objectives
Zetton Mini-Wizard Mode requires the player to have visited Baltan’s Bash, Bemular Battle, Jirahs, and all six Pigmon Quick Battles. The mode directly uses the machine’s seven physical ball locks: balls must be placed into the requested positions before the associated multiball phase begins. The different capture systems encountered separately throughout the game are therefore brought together for a single advanced objective.
Ultra Brothers Wizard Mode sits above this progression and requires completion of the game’s primary objectives. Access therefore depends on broader ruleset progression rather than simply visiting each battle. Baltan, Bemular, Jirahs, the Quick Battles, and their associated sequences form the stages required before reaching this advanced portion of the game.
The code continued to evolve several years after the machine’s release. The current version is v1.18.1. It adds a function allowing the Start button to be held to launch a Wizard Mode, a new interface corresponding to the modern surround treatment, new “Kaiju Detected” videos when completing the drop targets, and audio for the introduction video. It also corrects several elements involving the speaker kit, credits, drop target diagnostics, and ball save behavior during multiballs. Software updates are installed through Spooky Pinball’s update system.
Artwork, Editions and Production
Matt Frank created the artwork for Ultraman: Kaiju Rumble, Matt Reister produced the sculptures, and Matt “Count D” Montgomery composed the original music. David Fawzma, David Van Es, and Matt Frank contributed to the animations. The game also features dedicated narration with direct references to the original television series. The playfield depicts the Science Patrol, Tokyo, and the different Kaiju through its scenery, buildings, and video sequences.
Spooky released three versions. The Standard Edition was announced at $6,995, the Blood Sucker Edition at $7,995, and the Collector’s Edition at $8,995. Total production was limited to 500 machines across all editions, with no fixed allocation announced for the three configurations. The final quantities of Standard, Blood Sucker, and Collector’s Edition machines therefore depended on orders placed during the production period.
The Blood Sucker Edition adds interior graphics, a knocker, shaker motor, RGB speaker system, target decals, a specific powder-coat finish, and a numbered plaque. The Collector’s Edition expands the package with its own finish, custom-cut side rails, numbered plaque, an interactive illuminated Ultraman topper, a sculpted Beta Capsule shooter rod, and an additional licensed decorative element.
Ultraman: Kaiju Rumble and Halloween are therefore separate production runs built around the same mechanical architecture. Halloween was limited to 1,250 machines across all editions, while Ultraman was limited to 500. Both machines were released in 2021 with the same Standard, Blood Sucker, and Collector’s Edition structure and the same original pricing, but each has its own license, ruleset, and production run.
PX Technical Summary
Specification | Ultraman: Kaiju Rumble |
|---|---|
Manufacturer | Spooky Pinball |
Year | 2021 |
Release | July 2021 |
License | Ultraman |
Licensor | Tsuburaya Productions |
Source Series | Ultraman, 1966 |
Initial Game Code | David Fawcett |
Initial Rules | Corwin “Bug” Emery / David Fawcett |
Later Software | Matt Kemp |
Later Rules | Luke Peters |
Engineering | Lukas “Spooky Luke” Kastner |
Artwork | Matt Frank |
Animation | David Fawzma / David Van Es / Matt Frank |
Music | Matt “Count D” Montgomery |
Sculpts | Matt Reister |
Cabinet Format | Standard Body |
Players | 4 |
Display | LCD |
Flippers | 4 |
PX LAYOUT™ | FAN MULTI |
PX LEVEL™ | MULTI LEVEL™ |
PX BALL KINETICS™ | MIXED |
Ramps | 4 |
Upper Playfields | 3 |
Physical Ball Locks | 7 |
Inlane Lifters | 2 |
Baltan Buildings | 3 |
Center Drop Targets | 3 |
Science Patrol Drop Target Lock | Yes |
Beta Capsule Scoop | Yes |
Dual Spinner Loop | Yes |
RGB Lighting | 150+ |
Pigmon Quick Battles | 6 |
Baltan’s Bash | Yes |
Bemular Battle | Yes |
Bemular Multiball | Yes |
Jirahs Mode | Yes |
Spacium | Yes |
Combos | Yes |
Zetton | Mini-Wizard Mode |
Ultra Brothers | Wizard Mode |
Standard Edition | Yes |
Blood Sucker Edition | Yes |
Collector’s Edition | Yes |
Total Production | 500 machines |
Standard MSRP | $6,995 |
Blood Sucker MSRP | $7,995 |
Collector’s MSRP | $8,995 |
Current Code | v1.18.1 |
Update Method | Spooky software update |
Manufacturer Support | Active |
